Centre For Development Of Advanced Computing

Centre For Development Of Advanced Computing has published Bids Are invited for Supply And Fixing Gypboard Partition - Supply And Fixing Of 75Mm Thick Metal Stud Partition Using 12Mm Thick Gypboard Conforming To Is-2095-1982. Screw Fixed To Either Side To 48Mm Studs Of 0.55Mm Thick With The 50Mm Floor And Ceiling Channel 0.55Mm And The Joints Duly Finished With Joint Compound Paper Tape And Two Coats Dry Wall Top Coat As Per Specification And Including 50Mm Thick Glass Wool In The Inside Of Partition Board For Soundproofing Including, All Leads And Lifts Etc Complete As Directed By The Dept . , Supply And Fixing Of Partical Board Partition - Supply And Fixing Of Cement Bonded Prelaminated Partical Board Aluminum Glazed Partition And Door Shutter Using 12Mm Cement Bonded Prelaminated Partical Board And 5.0 Mm Board To A Height Of 0.91 Meter At Bottom Panel And Remaning Height With Glass And Aluminum Section (Jindal) Powder Coated To 12 To 15 Microns And Of Section Of Size 37Mm X62mm And 1.5 Mm Thickness With One Meter Centre To Centre Duly Fixed With Help Clip Beading On Both Sides Including Fixing The Frame To Pillars By M.S.Flats, Bolts And Nuts Including Cost And Conveyance Of All Materials Etc, Complete As Directed During Execution. , Supply And Applying Of Wall Putty - Supply And Applying Of Wall Putty White Cement/Polymer/Cement/Based Putty Of Average 1 To 2Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth After Thoroughly Brushing The Surface To Remove All Dirt And Remains Of Loose Powdered Material, Applying Emery Paper, Sand The Surface, Clean And Wipe Of Loose Dust Applying Knifing Paste Filler Putty Knife/Mullion Pad, Air Dry For 2-3 Hours, Sand With 180 And 320 Nos. Emery Paper For The Surface Preparation Including Cost And Conveyance Of All Materials For Work Site And All Operational Incidental Labour Charges Complete For Finished Item Of Work For Partition For All Floors Including Overheads And Including Seigniorage Charges Etc, Complete , Supply And Applying Of Acrylic Emulsion Paint -. Last date of submission for this tender is 2026-02-13. This is a Aluminium Furniture tender in Ranga Reddy, Telangana