Tamil Nadu Small Industries Corporation Limited

Tamil Nadu Small Industries Corporation Limited has published Fabrication And Carpentry Labour Contract Of Steel And Wooden Furniture Items -2 Fabrication Labour Charges For The Steel Trainee Locker Size 78” X 36” X 19” With Lockers ( Tscub 019 ) Made Out Of 20 G Sheet With 10 Lockers Of Individual Locking System With Grey Colour Enamel Paint As Per Photocopy-A 3 Fabrication Labour Charges For The Steel Senior Plain Cup Board Of Size: 78” X 36” X 19” ( Tscub 001 ) Made Out Of 20 G , 16 G, 14 G Cr Sheet, With 4 Shelves Forming 5 Compartments, With One Coat Of Red Oxide And Two Coat Of Olive Green Enamel Paint Finish As Per Photocopy-B 4 Fabrication Labour Charges For The Steel Plain Cupboard Of Size 2.50 Mtrs X 1.20 Mtr X 0.5 Mtr ( Tscub 014 ) Made Out Of 20 G, 16 G, 14 G Cr Sheet, With 4 Shelves Forming 5 Compartments With One Coat Of Red Oxide And Two Coat Of Olive Green Enamel Paint Finish. As Per Photocopy-C 5 Fabrication Labour Charges For The Steel Almirah Of Size: 120 Cm X 60 Cm X 45 Cmmade Out Of 20 G Cr Sheet, With 3 Shelves Forming 4 Compartments With One Coat Of Red Oxide And Two Coat Of Olive Green Enamel Paint Finish, With Single Door. As Per Photocopy-D 6 Fabrication Labour Charges For The Metal Rack ( Heavy Duty ) Of Size: 100 Cm Height X 150 Cm Length X 45 Cm Width Made Out Of 20 G Cr Sheet, With One Coat Of Red Oxide And Two Coat Of Olive Green Enamel Paint Finish. Nas Per Photocopy-E 7 Fabrication Labour Charges For The Open Type Storage Rack Of Size 6’ X 3’ X 1 ½’ Made Out Of Using 20G Cr Sheet And Suitable Angle With Leg 40X40x3mm, Having 4 Shelves Forming 5 Compartment With One Coat Of Red Oxide And Two Coat Of Olive Green Enamel Paint Finish N As Per Photocopy-F 8 Fabrication Labour Charges For The Closed Type Storage Rack Of Size: 6’ X 3’ X 1 ½’ Made Out Of Using 20G Cr Sheet And Suitable Angle With Leg 40X40x3mm, Having 4 Shelves Forming 5 Compartment + Top And Bottom Having 3 Side Closure With One Coat Of Red Oxide And Two Coat Of Olive Green Enamel Paint Finish As Per Photocopy-G 9 Carpentry Labour Charges For The Wooden Assistant Table ( Special Type ) Of Size 48 X 24 X 30 ( Twtbl 011 ) : Nmade Out Of 18 Mm Plywood And 1 Mm Lamination Sheet With 35 X 15 Mm Beeding With A Drawer, Cupboard, Keyboard, Lock And Key Arrangements Top With Good Polish Finish. As Per Photocopy-H 10 Carpentry Labour Charges For The Teak Wood Assistant Chair ( Staff Chairs ) ( Twchr 006 ) Teak Wood Framed With Wire Nylon Wire Knitted Seat & Back Having Good Polish Finish With Teak Wood Arm. As Per Photocopy-I 11 Carpentry Labour Charges For The Teak Wood Work Bench Of Size: 2400 X 1200 X 900 Mm Made Out Of Tw Legs ( 4X4 ) With 6 Legs Strengthened By Steel Bracket With Top Rails 4 X 2 With Painting And Thickness Of Top Plank 2 And With Good Polish Finish. As Per Photocopy-J 12 Carpentry Labour Charges For The Wooden Stool With L Top Of Size: 15” X 15” X 20” Ht Top ( Twstl 004 ) Made Out Of 18 Mm Plywood & 1Mm Laminated Sheet With 35 X 15 Mm Beeding, Four Leg Size 2” X 2”, With Good Polish Finish As Per Photocopy-K 13 Carpentry Labour Charges For The Teakwood Lab Table With Power Connection Panel Of Size: 183 Cm X 120 Cm X 80 Cm Ht Made Out Of 6 Legs ( 3” X 3” ) With Top Plank 1” Thick, Drawer And Shutter Storage At One Side. As Per Photocopy-L 14 Carpentry Labour Charges For The Teakwood Work Bench With Teakwood Rubber Sheet Top Of Size: 2000 X 1000 X 700 Mm Made Out Of 2”X 2” Erw 18 G Tube Ivery Enamel Paint Finished Frame Having Good Polish Finished 2” Thick Teakwood Slab Top With ¾” Rubber Sheet Of Legs Strengthened By Steel Brackets. As Per Photocopy-M 15 Carpentry Labour Charges For The Teak Wood Work Bench Of Size: 1500 X 800 X 750 Mm Made Out Of Tw Legs ( 3X3 ) With 6 Legs Strengthened By Steel Bracket With Top Rails 4 X 2 With Painting And Thickness Of Top Plank 1½ And With Good Polish Finish. As Per Photocopy-N 16 Carpentry Labour Charges For The Teak Wood Work Bench Of Size: 2500 X 1200 X 600 Mm Made Out Of Tw Legs ( 4X4 ) With 6 Legs Strengthened By Steel Bracket With Top Rails 4 X 2 With Painting And Thickness Of Top Plank 2 And With Good Polish Finish. As Per Photocopy-O N. Last date of submission for this tender is 2020-01-27. This is a Fabrication Work tender in Tansi Corporate Office Guindy, Tamil Nadu