Tamil Nadu Generation And Distribution Corporation Limited

Tamil Nadu Generation And Distribution Corporation Limited has published Tender For Works Contract For Kunjandiyur Section In Mettur Division In Mettur Edc; 1 Work contract schedule 2 Excavationofpolepitupto27 (8.0 m) Pole by using JCB or manual 3 Excavation of pole pit for 30 RCC pole /9.00m PSC pole by using JCB or manual 4 ExcavationStay pit 4.5 to 5 depth by using JCB or manual 5 Hard rock requires blasting 6 Hard rock without blasting (Where houses are located) 7 Erection of PSC/ RCC poles upto 8.00m. (27) crane or manual 8 Erection of PSC/ RCC poles/Metal poles above 8.00m by using JCB or maual 9 Erection of stay set complete 10 Fixing of HT V cross arms all type channel cross arm guarding croos arm 11 Fixing of LT 3 -phaseX arm 12 Fixing of LT 1 -phaseX arm 13 Fixing of HT/LT TI Fittings 14 Fixing of HT Pin Insulators - 22 KV 15 Fixing of HT 11 KV Strain disc 16 Fixing of LT Pin insulators 17 Fixing of LT Shackle 18 Fixing of Alu Knob 19 Paving , Stringing, Binding & Jumpering of ACSR 7/3.35 & AAAC 7/3.15 mm 20 Paving , Stringing, Binding & Jumpering of ACSR 7/2.59 mm & ACSR 7/2.11 mm AAC 7/2.50 21 Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer) Per 22 Erection of D.P. structure with AB switch, top channel, cross bracing, earthing,painting, providing stay including concreting 23 Erection of new transformer all capacity with jumpering 24 Loading or unloading of transformer above 200 KVA 25 Transport of poles/Materisal/ conductor and other Materisal below 8 km plains 26 Loading of Materisal 27 unloading of Materisal 28 Loading of pole (7.5/8.0/9.14M) 29 unloading of pole (7.5/8.0/9.14M) 30 Loading of poles above 9.0 M 31 unloading of pole above 9.0 M 32 Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manula up to 100 m 33 Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manula beyond 100 m 34 Earthing of pole with coil earthing including burying looping and binding 35 Alteration of Back clamp 36 Alteration of Stay clamp 37 Drilling of Holes channel onl 3/4 &1 per hole 38 Cutting of flat 39 Cutting of channel 40 Cutting of angle 41 Releasing of grills form RCC poles 42 Dismandilling of PSC/RCC pole upto 8.00m.(27) crane or manual 43 Dismandilling of V cross arms all type channel cross arm guarding cross arm 44 Dismandilling LT 3 -phase cross arm 45 Dismandilling LT 1 -phase cross arm 46 DismandillingHT/LT TI Fittings 47 Dismandilling of22 KV Strain disc 48 Dismandilling 22 KVPin Insulators 49 Dismandilling LT Shackle 50 Dismandilling LT Pin Insulators 51 Dismandilling Alu Knob 52 Releasing of single -phase Service and re-fixing 53 Releasing of 3 -phase Service and (upto 50 HP) re-fixing 54 Dismandilling of stay set 55 Re-sagging ACSR 7/3.35mm /AAAC 3.15 mm Rabbit conductor 56 Re-sagging ACSR 7/2.59mm /AAAC 2.50 mm Weasel and ACSR 7/2.11mm conductor . Last date of submission for this tender is 2025-08-19. This is a Tree Cutting tender in Mettur, Tamil Nadu