Tamil Nadu Generation And Distribution Corporation Limited

Tamil Nadu Generation And Distribution Corporation Limited has published E-Tender For Erection, Dismantling Of Poles ,Ht/Lt Lines And Other Allied Extension Works In Of East/Sathy Subdivison (Only For Plains); 1 Excavation of pole pit upto 27 (8.0 m) Pole by using JCB or manual 2 Excavation of stay pit 4.5 to 5 depth by using JCB or manual 3 Excavation of pole pit above 8 mtr Pole by using JCB or manual 4 Excavation of pole/stay pit hard rock requires blasting 5 Excavation of poles /stay pit hard rock without blasting (where houses are located) 6 Erection of PSC/RCC poles/Metal poles upto 8.00m. (27) by using JCB or manual 7 Dismantling of PSC/RCC poles/Metal poles upto 8.00m. (27) by using JCB or manual 8 Erection of PSC/RCC poles/Metal poles above 8mby using JCB or maual 9 Erection of Metal supports above 9.00m /RSJ/Rail pole/Fabricated poles/Tubular pole by using JCB or manual. 10 Erection of stay set complete 11 Fixing of HT V cross arms (all types) / channel cross arms/guarding Cross arms 12 Dismantling of HT V cross arms(all types) / channel cross arms/guarding Cross arms 13 Fixing of LT 3 phase cross arms 14 Dismantling of LT 3 phase cross arms 15 Fixing of LT Single phase cross arms 16 Dismantling of LT Single phase cross arms 17 Fixing of HT/LT TI Fittings 18 Dismantling of HT/LT TI Fittings 19 Fixing of HT pin Insulators 11 KV 20 Dismantling of HT pin Insulators 11 KV 21 Fixing of HT 11 KV strain disc. 22 Dismantling of HT 11 KV strain disc. 23 Fixing of LT pin Insulator 24 Dismantling of LT pin Insulator 25 Fixing of LT shackle 26 Dismantling of LT shackle 27 Fixing of Aluminium Knob 28 Dismantling of Aluminium Knob 29 Earthing of pole with coil earthing including burying looping and binding. 30 Paving of conductor,stringing etc complete with ACSR 7/3.35mm /AAAC 3.15mm Rabbitconductor 31 Paving of conductor,stringing etc complete with ACSR7/2.59mm /AAAC 2.50 mm weasel and ACSR7/2.11 mm conductor 32 Erection of Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle including concreting (Except erection of Transformer) 33 Guarding arrangements for HT Guarding 34 Loading of poles upto 8m /27-0 35 Loading of poles above 8m 36 Un loading of poles upto 8m/27-0 37 Un loading of poles above 8m 38 Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual up to 100 m 39 Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m (i.e) No return charge 40 Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)below 8 Kms 41 Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)above 8 KM for additional KM. (i.e) No return charge 42 Dismantling of conductor,stringing etc complete with ACSR7/2.59mm /AAAC 2.50 mm weasel and ACSR7/2.11 mm conductor 43 Loading or unloading of Transformer upto 100 KVA for each 44 Loading or unloading of Transformer above 100 KVA and upto 200 KVA 45 Erection of New Transformer all capacities (with jumpering) 46 Erection of single pole Transformer structure complete in all respects with wiring, Earthing,fixing of open type fuse units, HT/LT LAS and jumpering 3 nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel,transformer bed structure including concreting (Except erection of Transformer) 47 Erection of street light including fixure fitting 48 Erection of street light service 49 Releasing of single phase service and re-fixing. 50 Releasing of 3 Q service and (upto 50 HP) re-fixing. 51 Erection of D.P. structure with AB switch top channel, cross brancing, HG fuse set, earthing painting earthing painting, providing stay and pole concreting 52 Re-sagging ofACSR 7/2.59mm/AAAC 7/2.50mm weasel and ACSR 7/2.11 mm conductor 53 Drilling of hole in channel only 3/4 & 1 54 Clearing of branches of trees . Last date of submission for this tender is 2025-09-03. This is a Overhead Line tender in Erode, Tamil Nadu