Tamil Nadu Generation And Distribution Corporation Limited

Tamil Nadu Generation And Distribution Corporation Limited has published Tender For Running Contract For Various Distribution Works In Respect Of Ae/ O&M / Pappampatty Section.; 1 Route surveying andpeg marking of HT/LTlines 2 Loading and un loading of of 9.14 Mtr poles / 9 Mtr PSC 3 Loading and un loading of of 8.0m pole psc 4 Transport of conductor from road side to workspot upto 1KM stringing and sagging up to 7/2.50 mm AAAC including PVC Cable up to 25Sqmm of conductor including binding of pin and proper tightening 5 Transport of conductor from road side to workspot upto 1KM stringing and sagging up to 7/3.15 mm AAAC including PVC Cable up to 25Sqmm of conductor including binding of pin and proper tightening 6 Transport of 9.0 Mtr PSC, 9.14 Mtr & and abovepoles including R.S Joist and Rail polesup to 8 KM 7 Transport of 8.0 Mtr PSC, and abovepoles including R.S Joist and Rail polesup to 8 KM 8 Excavation of pits in ordinary soil 9.14 Mtr Poles /9.0 Mtr PSC Poles/ All Metal poles(1.25x06x1.83M) 9 Excavation of pits in ordinary soil8.0mtr PSC Poles/ All Metal poles(1.25x06x1.83M) 10 Excavation of pits in ordinary soil forStay pit 11 Erection works( including refilling of excavation sand) 9.14 Mtr Poles 12 Erection works( including refilling of excavation sand) 8.0 Mtr Poles 13 Erection of stay set complete ( including refilling of excavation of sand) 14 Fixingof LT Sph X Arm/HT TI Fitting/ LT TI Fitting 15 Fixing of LT 3phX Arm 16 Fixing of 4 - 6 VX Arm 17 Fixing of tapping channel / Guarding X Arm 18 Fixing of 22 KV/33KV Pin Insulator/ PT insulator 19 Fixing of 22 KV Disc 20 Fixing of LT Shackle 21 Fixing of LT Pin insulator 22 Fixing of Aluminium Knob 23 Earthing of Poleincluding buring ,looping and binding 24 Mass concerting for poles ( Cement ,Jelly,sand supplied by contractor) 25 Resagging of Cut Point Location 26 Flat guarding 27 Dismantling of 7.5m/8.0m Poles 28 Dismantling of9.14 Mtr. Poles 29 Dismantling of Stay set complete 30 Dismantling of conductors upto 7/2.59 MM and Coiling and Transporting from workspot to road side 31 Dismantling of conductors 7/3.35 MM and above and Coiling and Transporting from workspot to road side 32 Releasing of LT S ph X Arm/TI Fitting 33 Relaasing of LT 3 ph X Arm 34 Releasing of 4 - 6 V Cross Arm/Tapping channal 35 Dismantling of Transformer Structure materials 36 Dismantling of AB Switch at D.T.Structure 37 Dismantling of H.G. fuse set 38 Dismantling of Earth Pipe and Structure earthing complete 39 Dismantling of 2 Nos. Open type fuse unit set with all wiring complete(including bus bar arrangement) 40 Dismantling of Distribution Transformer 41 TransportingofLine Materials from Stores toworkspot 42 Loading and Un loading of Line Materials from Stores to worksite 43 loading /un Loading of D,Ts at field and stores without Crane 44 Erection of Top Channel, Bed Channel and Belding angle with all Structure Clamps 45 Erection of AB Switch with PT Insulators 46 Erection of HG Fuse Set 47 Erection of Distribution Transformer 48 Providing Jumbering of Structure 49 Erection of Cross Brassing Set complete 50 Transformer wiring in LT Side including Jumbering Bus Baretc. 51 Erection of LT Open tyoe fuse unit arrangement Single/Double (Including Jumbering) 52 Transformer Structure Poles Mass Concreting with coping 53 Painting of Structure complete excluding Distri.Tr.(one coat of Red Oxide) with painting materials (2kg x 150) 54 Painting of Structure complete excluding Distri.Tr.(one coat of Aluminium paint)with painting materials (1.5 Ltr x 350) 55 Colour washing of 1 No. Structure Poles excluding cost of Distember/Snowsem) with painting materials (2 kg x 60) 56 Paing of Transformer name Plate details including cost of the sheet (1.5 X 1) and paint 57 Painting name of SS at seating Channel including paint 58 Erection of Single pole Transformer Bed 59 Erection of Single pole A.B. Switch (G.OS) 60 Erection of Single pole H.G.Fuse set 61 Painting of all clamp , other materials and painting of Strucure pole( Excluding Paint) 62 LT cable arrangement 63 Provision of Distribution Transformer Name Board (Name of the 22/11 kv feeder, Name of the SS, Capacitty , Danger Board ) 64 Fabrication of centre support and erection of centre support including pits 65 Mass concreting for centre support for 2 feet including all materials 66 Fixing of Danger Board (Excluding Paint) 67 Erection of Plinth for (22 KV) Single pole Structure 68 Erection of Earth pipes and Structure earthing(complete) 69 Mass concreating PCC including cost of Jally,MSAND& cement,Lead ,Lift etc.for 9m Square pole with copping for single pole 70 Providing Holes of all size Flat/Angles/Channels 71 Welding 72 Manufacturing of clamps & Altering of clamps 73 Transporting of Distribution Transformer by using private vehicle ( all capacities up to 60KM) 74 GST . Last date of submission for this tender is 2025-01-10. This is a Overhead Line tender in Dindigul, Tamil Nadu