Tamil Nadu Generation And Distribution Corporation Limited

Tamil Nadu Generation And Distribution Corporation Limited has published Tender For Works Contract In Deevattipatty Section; 1 Work contract schedule 2 Excavation of pole pit upto 27 (8.0 m) Pole by using JCB or manual 3 Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual 4 Excavation of Stay pit 4.5 to 5 depth by using JCB or manual 5 Excavation ofHard rock without blasting (where houses are located) 6 Erection of PSC/ RCC poles/Metal poles upto 8.00m. (27) by using JCB or manual 7 Erection of PSC/ RCC poles/Metal poles above 8.00m by using JCB ormaual 8 Erection of stay set complete 9 Fixing ofHT V cross arms (all types) / Channel cross arms/ Guarding Cross arms 10 Fixing ofTapping Channel Cross arm 11 Fixing ofLT 3 phase cross arms 12 Fixing ofLT Single phase cross arms 13 Fixing ofHT/LT TI Fittings 14 Fixing of Aluminium Knob 15 Fixing of HT pin Insulators 22 KV 16 Fixing of HT 11 KV strain disc. 17 Fixing of LT pin Insulator 18 Fixing of LT shackle 19 PavingofConductor,stringing etc., completewith ACSR 7/4.09 mm Raccoon conductor 20 PavingofConductor,stringing etc., completewith ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor 21 PavingofConductor,stringing etc., completewith ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor 22 Releasing of ACSR/AAAC conductors from conductor drum and coiling 7/2.59, AAAC 7/2.50, ACSR 7/3.35, 7/3.15 MM 23 Erection of street light including fixure fitting 24 Erection of street light service 25 Releasing of single phase service and re-fixing. 26 Releasing of 3 phase service and (upto 50 HP) re-fixing. 27 Sleeve concreting including materials (Cement + River Sand/ Msand and Blue metals and watering) 28 Earthing of pole with coil earthing including burying looping and binding. 29 Loading of poles upto 8.0 M/ 27 30 Loading of poles above 8.0 M 31 UnLoading of poles upto 8.0 M/ 27 32 UnLoading of poles above 8.0 M 33 Loading of materials 34 Unloading of materials 35 Loading or unloading of Transformer upto 100 KVA 36 Erection of New Transformer all capacities (with jumpering) 37 Dismantling of Transformer all capacities (with jumpering) 38 Replacement of failed transformer all capacites (with Jumpering) 39 Flat guarding including fixing of 2 Nos. cross arms. 40 Transport of Poles /Materials/conductors and other charges Below 8 Kms (Plains) 41 Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m 42 Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m 43 Dismantling of RCC, REC, PSC pole of all sizes including the closing of the pit 44 Dismantling of stay set complete 45 Dismantling of 1ph xarm 46 Dismantling of 3ph xarm 47 Dismantling of HT/LT TI fitting 48 Dismantling of 22kV Pin insulator 49 Dismantling of 11 kV strain disc 50 Dismantling of LT Pin insulator 51 Dismantling of LT shackle 52 Dismantling of Aluminium knob 53 Dismantling of conductor of size ACSR 7/2.59 /AAAC 7/2.50 54 Dismantling of conductor of size ACSR 7/3.35 /AAAC 7/3.15 55 Dismantling of HT V cross arms (all types) / Channel cross arms/ Guarding Cross arms 56 Dismantling of Tapping Channel Cross arm 57 Labour charges for alteration of Back Clamps/ Stay Clamps to suit for the works 58 Drilling of hole in channel only 3/4 & 1 59 Cutting of pipe 60 Erection of Transformer structure complete inallrespects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structurepoles,fixingoftop channel, seating channel, belting angle including concreting (Except erection of Transformer) 61 Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer) 62 Erection of D.P. structure with AB switch, top channel, cross bracing, earthing, painting, providing stay including concreting 63 Dismantlingof Transformer structure complete inallrespects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structurepoles,fixingoftop channel, seating channel, belting angle including concreting (Except erection of Transformer) 64 Re-sagging ACSR 7/4.09 mm Raccoon conductor 65 Re-sagging ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor 66 Re-sagging ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor 67 Releasing of Grills from RCC Poles 68 Cutting of coconut leaves 69 Clearing of branches of trees 70 G.S.T. @18% should be Entered by the Bidder . Last date of submission for this tender is 2025-01-23. This is a Tree Cutting tender in mettur, Tamil Nadu