Rural Development And Panchayats Department

Rural Development And Panchayats Department has published Providing School Furniture Bench Desk And Materials At Pues School At Chinoor Puthupettai Panchayat In Parangipettai Block.; 1.00 Manufacturing and Supply of Steel Student bench of Size 48x12x24-h back rest made out of 18 Gauge CR sheet with 4 Nos of Legs. The legs, top and bottom frames are made out of 1 Square pipe of 16 Gauge thickness. Extra bracing with 1 square pipe has to be welded in the width direction both at top and bottom frame. The bottom frame all-round has to be fixed at a height of 6 from the bottom tip pf the leg. The stiffener should be given made of 18 gauge CR sheet below the bottom of the top sheet. The top CR Sheet to be fixed over the connection rod 16gauge 1 square rod which is fixed over leg with necessary tack welding. The square pipe bottom to be provided 1rubber bush. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials lab ours charges, painting , taxes and other incidental charges etc., complete. 2.00 Manufacturing and Supply of Steel Student Dual Desk with Self Size of 48x15x24-h made out of 18 Gauge CR sheet for top of the bench and bottom book keeping shelf with 4 Nos of Legs. The 4 Nos of legs, top and bottom frames are made out of 1 Square pipe of 16Gauge thickness. Extra bracing with 1 square pipe has to be welded in the width direction both at top and bottom frame. The bottom frame all-round has to be fixed at a height of 6 from the bottom tip the leg. The stiffener should be given made of 18 gauge CR sheet below the bottom of the top sheet. The top CR Sheet to be fixed over the connection rod 16 gauge 1 square rod which is fixed over leg with necessary tack welding. The square pipe bottom to be provided 1rubber bush. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials lab ours charges, painting , taxes and other incidental charges etc., complete. 3.00 Supply of Steel table 4x2x2½ with one side 1 drawer other side one cup board, tabletop with compressed wood, cupboards are to be provided with Godrej or equivalent brand lock with handle.18 Gauge CR sheet with 18 gauge 1 Square pipe for 4 legs and the rod made of 1 Square pipe bottom around. The top CR Sheet to be fixed over the connection rod 18 gauge 1 square rod which is fixed over leg with necessary tack welding. The square pipe bottom to be provided 1rubber bush. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials lab ours charges, painting, taxes, transportation loading unloading charges and other incidental charges etc., complete. 4.00 Manufacturing and supply of Headmaster steel table of size 5x 3x 2½with one side 3 drawer and other side 1 drawer and one cupboards are to be provided with Godrej or equivalent brand lock with handle.18gauge CR sheet sheet with 16 gauge 1 Square pipe for 4 legs and the rod made of 1 Square pipe bottom around. The top plywood Sheet to be fixed over the connection rod 16 gauge 1 square pipe which is fixed over leg with necessary tack welding. The square pipe bottom to be provided 1rubber bush. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials lab ours charges, painting , taxes, transportation loading unloading charges and other incidental charges etc., complete. 5.00 Manufacturing and supply of steel Almyirah of size 6½X 3x1½ using 18G CR sheet alround including cutting with necessary tack welding. All joints are ground smoothly and without burrs, two coats of synthatic enamel paint over a coat of primer is given the cost inclusive of all materials, labour charges, painting, taxes, transportation loading unloading charges and other incidental charges etc., complete. 6.00 Manufacturing and supply of Steel Rack of size 6X3x1¼ steel angle 14G slatted steel angle and 18G thickness CR sheet plate of size 3’ x 11/4’ of 5 nos should be given. All joints are bolted. Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials lab ours charges, painting , taxes, transportation loading unloading charges and other incidental charges etc., complete. 7.00 Manufacturing and supply of S type Chair using 16 gauge 1 Square pipe of 25mm dia with height of 2 3/4 having sitting position at 11/2’ fact from ground level and backrest to a height of 23/4’. The chair is provided with hydraulic steel base and TW handle arms. The seat is to be knitted with best quality of nylon flat strings of approved colors. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials lab ours charges, painting , taxes, transportation loading unloading charges and other incidental charges etc., complete. 8.00 Towards Charges for Transporting, loading and unloading charges 9.00 Photo Charges 10.00 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}. Last date of submission for this tender is 2025-08-18. This is a Classroom Furniture tender in Parangipettai, Tamil Nadu