Rural Development And Panchayats Department

Rural Development And Panchayats Department has published Rate Contract For Supply And Delivery Of Furnitures Required For Agamt Libraries In All The Blocks Of Virudhunagar District Under Agamt For The Year 2021-22. , Slotted Anglerack Slotted Angle Rack Of Size 1.80M Ht X 1.20M Width Using Crca Sheet Slotted Angles Of Size 40Mm X 40Mm X 14 Gauge For Frames Of Rack, Shelves Of Size 1.20 X 0.45M Spaced At An Interval Of 0.35M Height And Side Covers Of Size 0.45M X 0.175M Placed At The Edge Of Each Shelves On Both Sides Of The Rack, With Central Partition Sheet Of Size 1.2M X 0.175M. Panels Of Shelves And Side Covers Shall Be Fabricated Out Of 18 Gauge Crca Sheet With Suitable End Folding/Necessary Stiffners. Angles And Panels To Be Fully Painted After Necessary Treatment, Using Stoving Oven For Drying. Quality Of All Materials Including All Necessary Accessories And Workmanship To Be Conformed To Latest Bis Standard. , Reading Table Plywood Top Steel Tables Size 1.80M Length X 0.90M Width X 0.75M Height, Using 6 Nos, Of 20 Gauge 32Mm Square Ms Pipes, Welded And Interconnected With 20 Gauge 32Mm Square Pipes Frame. Laminated Plywood With Necessary Supports On The Pipes, Teakwood Edge Beading, Fully Painted Of Entire Surfaces Except Laminated Top Surface Including Edges And Bottom Surfaces Of The Plywood Etc. Complete. The Laminates Of 0.80Mm Thickness And Plywood Of 20Mm Thickness To Be Used. Laminates And Painting To Be Of Approved Shade And Colour. Quality Of All Materials Including All Necessary Accessories And Workmanship To Be Conformed To Latest Bis Standard. , Librarian Table Plywood Top Steel Tables Size 1.35M Length X 0.75M Width X 0.75M Height Using 4 Nos. Of 20 Gauge 32Mm Square Ms Pipes Welded And Interconnected With 20 Gauge 32Mm Square Pipes Frame. Laminated Plywood Top With 1 No. Of Drawer Cum Cupboard Unit (0.45M Width, 0.50M Length) And (0.125M + 0.45M Height) Made Of 20 Gauge Crca Sheet. Locks, Keys, And Handles, Teakwood Edge Beading, Fully Painted Of Entire Surfaces Except Laminated Top Surface Including Edge And Bottom Surfaces Of The Plywood, Etc., Complete. The Laminates Of 0.80Mm Thickness And Plywood Of 20Mm Thickness To Be Used. Laminates And Painting To Be Of Approved Shade And Colour. Quality Of All Materials Including All Necessary Accessories And Workmanship To Be Conformed To Latest Bis Standard. , S Type Chair Standard Size Single ‘S’ Type Chair With Full Arm Using 16 Gauge 25Mm Dia Pipe With First Quality Country Wood Seat And Back Wire Netted With Good Quality Wire And Including Painting Etc., Complete. Painting To Be Of Approved Shade And Colour. Quality Of All Materials Including All Necessary Accessories And Workmanship To Be Confirmed To Latest Bis Standard. , Plastic Chairs Supply Of Moulded Plastic Chair With Arms, Of Isi Standard With Approximate Dimension -Length 575Mm, Width 570Mm, Height 800Mm, Approximate Weight 2.250 Kg.. Last date of submission for this tender is 2022-09-30. This is a Storage Chests And Cabinets And Trunks tender in Virudhunagar, Tamil Nadu