Government Engineering College

Government Engineering College has published Purchase Of Furnitures Purchase Of Furnitures For Civil Engineering Department And Principals Office , Furnitures , Steel Cupboard With Door (Almirah)Steel Cup Board Of Size 78’’ X 36’’ X 18’’ (H X L X B) Made Out Of Body 20 Gauge Cr Sheet With Door 18 Gauge Cr Sheet, With 5 Compartments With Locking Arrangements And One Coat Redoxide, Two Coat Of Quality Enamel Paint Finish. , Steel Solid Angle Racking Systemtype : Open TypeDimensions: 78’’ X 36’’ X 18’’ (H X L X B)Number Of Shelves: 5 Angle Posts: Rolled Steel Angle Posts Shall Be Of 40 X 40 X 3 Mm Size Metal Shelves: Metal Shelves Shall Be Made From Mild Steel Sheets Of 1 Mm Thickness. Shelves Shall Have Lipped Flanges, Width Of Flange Being 30 Mm And Depth Of Lip 15 Mm.Gussets: Gussets Shall Be Made Of 1 Mm ( Minimum ) Thick Mild Steel Sheet And Shall Be Not Less Than 75 Mm Long At Each End Jointing To The Shelf And Angle Post. Minimum 8 Gussets, Four On Each On Each Face Shall Be Fitted To The Open Type Racks.Materials:All Material Supplied Is Galvanized Which Is Corrosion Resistant And Rust Free Ensuring Long Life. , Stainless Steel 304 Laboratory Stools Supply Of Ss 304 Bright Finished Stool, Size 350 Mm And Height 450 Mm, As Per Sketch And Attached Drawing: Dimensions: Size Of The Top: 350 Mm Round, Thickness: 1.6 Mm, With 450 Mm Deep Drawn As Shown In The Drawing. Top Shall Be Finished By Chrome Plating. Frame:• Number Of The Legs: 04 Numbers • Size Of The Leg: 1 Inch Pipe, Heavy Duty. Bottom Of The Legs Shall Be Provided With The Rubber Or Good Quality Plastic Shoe As Shown In The Picture. • Size Of The Cross Leg Member: ½ Inch Pipe, Heavy Duty. • All The Welds Shall Be Smooth And Finished. • Whole Stool Shall Be Bright Finished. • The Stools Shall With Stand A Load Of 100 Kgs. • Tolerance Of ±5% In Dimensions Is Permitted Subjected To Overall Sitting Comfort. • All Sharp Edges Shall Be Removed. , S Type Chairs Chair Leg Made Out Of 1’’ 16 Gauge Round Pipe And Chair Seat And Back. Teak Wood Frame With Netting Finish Handle Teakwood Seat Size 18’’ X 17’’ And Back Seat 18’’ X 14’’ With Leg One Coat Red Oxide And Two Cost Enamel Paint Finish.. Last date of submission for this tender is 2021-09-15. This is a Coats And Jackets tender in Tpgit, Vellore, Tamil Nadu