Deparment Of Technical Education

Deparment Of Technical Education has published Consumables For Manufacturing Technology Lab , Consumables For Manufacturing Technology Lab , Ehn Wood (12 × 1½ × 2) , Ms Flat 80 Mm × 50 Mm × 6 Mm , Ms Round Rod (Ø 25 Mm × 70 Mm) , Aluminum Round Rod (Ø 25 Mm × 50 Mm) , Aluminum Square Plate (100 Mm × 100 Mm × 10 Mm) , Cotton Waste , Grease , Sae 40 Oil , Soap Bar , Welding Gloves Leather , Welding Rodø 3.15 , Welding Shield , Doubleopen End Spannerset 6-32 , Double Ring Spanner Set 6-32 , Clamp Meter , Pipe Wrench 1.1/2 Feet , Pipe Wrench 2 Feet , Cutting Plier , Screw Driver ¾ Feet Set , Chisel 3/4 Feet , Claw Hammer , Hammer 1 Kg , Hammer 1/2Kg , Poker , Taparia Box Spanner Set , Allen Key Set “Mm” , Allen Key “Inch” , Tachometer , Compressor Mounting Bush , Flat Belt 2 Inch , 20 Mm Coir Rope , Copper Wire 1.5 Mm , Gi Sheet (Sheet Metal- 26 Gauge) 8 Feet × 4 Feet , 1 Inch Ball Valve (Threaded Ss Body) , ¾Inch Ball Valve (Threaded Ss Body) , ½ Inch Ball Valve (Threaded Ss Body) , Gi Threadedbarrel Nipple ( ½ Inch × 9 Inch) , Gi Threadedbarrel Nipple ( ¾ Inch × 9 Inch) , Gi Threaded Barrel Nipple (1 Inch × 9 Inch) , Gi Threaded T Joint 1 Inch , Gi Threaded T Joint ¾ Inch , Gi Threaded T Joint ½ Inch , Pvc (¾ Inch Elbow) , Pvc (1 Inch Elbow) , Pvc 1 Inch × ¾ Inch Reducer , Pvc ¾ Inch T Joint , Pvc ¾ Inch Coupling , Pvc ¾Inch Ball Valve Pasted , Pvc Pipe 1 Inch 6 Meter , Pvc Pipe ¾ Inch 6 Meter , Pvc ¾ Inch Water Tap , Pvc ½ Inch Water Tap , Foot Valve 1 Inch , Hss Drill Bit 6 Mm , Hss Drill Bit 8 Mm , Hss Drill Bit 10 Mm , 3D Printer Filament Wire Acrylonitrile Butadiene Styrene (Abs) , Injection Moulding-Granules- Acrylonitrile Butadiene Styrene (Abs), Nylon (Polyamide ),Polypopylene (Pp),Low-Density Polyethylene (Ldpe), High-Density Polyethylene (Hdpe) - 5Kg. Each (Total-25Kg.) , Polyurethane Pneumatic Hose 8 Mm× 5 Mm , Polyurethane Pneumatic Hose 10 Mm× 5 Mm , Brass Hex Connector ½ × ¼ , Hose Connector Fitting Press Type 8 Mm , Hose Connector Fitting Press Type 10 Mm , Tig Welding Electrode Ms 1.6 Mm , Tig Welding Gloves , Hole Saw Cutter 25 Mm – 80 Mm , Electric Bench Drilling Machine 480 Watts 220 Volts , Rechargeable Battery With Charger Aa With Four Battery , Adjustable Tap Wrench M1 – M12 , Tap 6 Mm, 8 Mm & 10 Mm- Each 2 Nos.(Total -06 Nos.) , Front Panel Mounting Should Consist Of Mimic Diagram With Dc Mcb, Fuses 2,Supply Indicators,Rpm Meter,Digital Voltmeters,Digital Ammeters,Bti 30 Terminals,3 Point Starter With Enclosure. Last date of submission for this tender is 2024-09-11. This is a Soap Bar tender in thanjavur, Tamil Nadu