Watershed Development And Soil Conservation Department

Watershed Development And Soil Conservation Department has published Open Gym Nirman Karya Open Gym Nirman KaryaTHAI-CHISPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mun (Height), to increase mobility of shoulder -elbow and hip-kce. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assenmbly, The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fiulfil the functional requirement. The Indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately).(As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 5 SEATED PULLER Providing and fixing of Pipe hinimuni of SONR C elass welded with MS. round base plate atlcast 250 mm & 10mnm th?ck, The handle frame shall be miniman 2NB C class GL. pine, The seat frame minimum of 32NB C Cass . pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High fensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolae Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately).(As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 6 SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body, The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from C class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately).(As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 7 CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm, (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 250 mm & Scanned 10mm thick The handle frame shall be made up from aleast 32NBC elass GI pipe. The seats and Back rests to be fined on the outer frames shall be made y of MS. Sheet of tie not less thin 310mm X 300 2mm thickness Closing Cipu thall be made sp of high quality Fiber reinferced Paenic material. H tenole itrel sith galvanized muts & bolts shall he used Rr ssemby The powdr coating chall be done with Pure Polyester pewders from Ackeevhle Berger/ Nerolac Paints with 60 to 79 micren thickness, complete repect including fixing the M.S. holdt in emen concrete e eld the whole structure, under the directions of Engineer-in charge to fullfil the finctional requirement. The indicative Design Photo is as per enclosed Photo no. 7. (The cement vcrete and excavation work thall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 8 POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lower limbs, waist and abdomen. The main structure frame shall be made from G.IL pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from C Class G.I. pipe. Closing Caps shall be thade up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 9 DOUTLE STANDING TWISTER Providing and fixing of Double Twister Standing of size not less than 1500mm (Length) x 600mm (Width) x 1300mm. (Height), to enhance flexibility of waist. The main structure frame shall be made from G.L pipe minimum of SONB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame is minimum of 25NB shall be made from C class G.L. pipe. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 0300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately).(As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 10 STANDIN SEATING TWISTER Providing and fixing of Scating & Standing Twister of size not leas than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children, The main structure frame shall be made from G.I pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 N, and 25 NB shall be made from C class G.L pipe. The handle frame of Scating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from C class G.L pipe minimum of 25mm NB The Twister plate to be fitted on the bottom frame shall be made up of MS. Round Plate of minimum size 300mm diameter and 10mm thickness Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in -charge to fillfil the functional requirement. The indicative Design Photo is s per enclosed Photo no. 10. (Thecement concrete and excavation work shall be paid separate.(As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 11 CHEST CUM SHOULDER PRTES Providing and fixing of Chest Press Cum Seated Puller of size not less than 2000mm Length) x 710mm (Width) x 2200mm (Height), to enhanice the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 8ONB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm X 300 mmX2mum thickness. Closing Capsvhall be made up of high quality Fiber reinforced Plastic material, High tensile steel with galvanized nuts & bolts shall be used for Assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. II (The cement concrete and excavation work shall be paid separately),(As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) 12 PUSH UP BARS Providing and fixing of Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.L. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from C Class G.I. pipe. Closing Caps shall be made up of high quality Fib nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022) . Last date of submission for this tender is 2022-04-02. This is a Wrenches And Drivers tender in Mandalgarh, Rajasthan