Watershed Development And Soil Conservation Department

Watershed Development And Soil Conservation Department has published Balwatika, Open Gymfor Seater Mrg Providing And Fixing Of For Seater Mrg Swing Of Size 4 / 5 Feet ( Diameter ) , 3 Feet ( Height ) Fabricated With A Center Pipe Frame Of 50 Nbshall Be Made From C Class G.I. Pipe And Frp Material. The Bottom Shall Be Welded With Support Of M.S. Round Plate Of 0250 Mm & 10Mm Thickness. The Bottom Frame Of 32Nb Shall Be Made From C Class G.L. Pipe. The Handle Frame Of 25Nb Shall Be Made From C Class G.1 Pipe. The Foundation Shouldbe Used For Fixing Is A Structure And Shall Be Made From Center Pipe Of G.I. Of 50 NbC Class Welded With M.S. Round Plate Of 0250 Mm & 10Mm Thick. Main Pipe Shall Be Supported With 25 Mm X 25Mm Ms. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness.Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts And Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness, All Complete As Per Drawing, Design, Directions And Approval Of Engineer-In Charge Regarding Material, Shape Of Equipment, Colour ( Of Metal, Seat And Pedal ) , And Fixing Of Equipment Etc. ( The 5 Circular Swing Four Seaterproviding And Fixing Of Circular Swing Four Seater Of Size 40 X325x50 Feet Fabricated With A Center Pipe Frame Of 63 Nilshall Be Made From Cles 11. Pipe And Frp Material The Boom Shall Be Welded With Grt Of Ms Round Place Of 250 Ms& 10Mm Thickness The Bottom Frame Of 32N Shall Be Made From Cless Gf Pipe. The Handie Frame Of 25N0 Shall Be Made From Class C Pipe The Foundation Should Be Used For Fixing Is A Structure And Shall Be Made From Omber Pipe Of 0.1 Of 65 Nbc Class Welded With Ms. Rosnil Plate Of 0256 M&10Mm Thick Main Pipe Shall Be Supported With 25 Mm X 23Mm M.5 Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of Imm Thickness Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tenule Steel With Galvanized Nuts And Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness, All Complete As Per Drawing, Design, Directions And Approval Of Engineer-In Charge Regarding Material, Shape Of Equipment, Colour ( Of Metal, Seat And Pedali, And Fixing Ofequipment Etc. ( The Cement Concrete And Excavation Work Shall Be Paid Separately 6 Four Seater See Saw Providing And Fixing Of Four Seater See Saw Of Size 5.5 X 6.25 X25 Feet Fabricated With A Center Pipe Frame Of50 Nbshall Be Made From C Class G.L. Material. The Bottom Shall Be Welded With Support Of M.S. Round Plate Of 07250 Mm & 10Mm Thickness. The Bottom Frame Of 32Nb Shall Be Made From C Class G.1. Pipe. The Handle Frame Of 25Nb Shall Be Made From C Class G.1. Pipe. The Foundation Should Be Used For Fixing Is A Structure And Shall Be Made From Center Pipe Of G.1. Of 50 Nbcclass Welded With M.S, Round Plate Of 0250 Mm & 10Mm Thick. Main Pipe Shall Be Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts And Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness, All Complete As Per Drawing, Design, Directions And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour ( Of Metal, Seat And Pedal ) , And Fixing Ofequipment Etc. ( The Cement Concrete And 7 Horse / Duck / Rabet Spring Riderproviding And Fixing Of Horse Spring Rider Of Size 3.0 X 25 Feet Fabricated With A Center Pipe Frame Of 40 Nb Shall Be Made From C Class G.I. Material And Frp Material The Bottom Shall Be Welded With Support Of M.S. Round Plate Of 0250 Mm & 10Mm Thickness. The Bottom Frame Of 32Nb Shall Be Made From C Class Gl Pipe. The Handle Frame Of 25Nb Shall Be Made From C Class G.L. Pipe. The Foundation Should Be Used For Fixing Is A Structure And Shall Be Made From Center Pipe Of G.1 Of 40 Nbc Class Welded With M.S Round Plate Of 0250 Mm & 10Mm Thick. Main Pipe Shall Be Supported With 25 Mm X 25Mm M.S. Angles Of 3 Num Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensilestoel With Galvanized Nuts And Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Microm Thickness, All Complete As Per Drawing, Design, Directions And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equpment, Colour ( Of Metal, Seat And Pedal ) , And Fixing Of Equipment Etc ( The Commnt Concept And Cond Work Shall Be Paid 8 Photo Board 9 ( 1.1 ) Different Varrities Of Shrubs 600 Mm To 900 Mm. ( Itme No 1.11.3 ) 10 Preparationofbedsforbedgingandshrubbaryby Excavating60cms.Deepandtrenchingtheexcavated Base To A Further Depth Of 30 Cms. Refilling The Excavated Earthafterbreakingclods&Mixingwith Manure In The Ratio 8 :1 ( 8 Parts Of Stacked Valume Of Earthafterreductionby20%Onepartofstacking Valume Of Manure After Reduction By 8% Flooding With Water Filling With Earth If Necessary ( Cost Of Manure Of Extraearthtobepaidforseperately ) . ( Asperpwdbsr 2019 , Chapter H-2, Item No 2.1.9 ) 11 Planting Of Trees / Shurbs / Hedge & Climbers Plants At Desireddistanceinarow&Watering. ( Asperpwdbsr 2019, Chapter H-3, Item No 3.3 ) 12 ( 4.1 ) In Hard Soilbsr Wrd 2020, Item No 1 C 13 4.1Inrows 5Cms. Apartin Eitherdirection . ( Itmeno3.1.3 ) 14 ?????? ??? ??? 1 ?????? : 2 ???? : 4 ????? ???????? ?????? ??? 12 ???? ????? ??? ?? ???????? ????? ?????, ?? ??? ??? ???? ??? ???? ? ( As Per Rdbsr 2021 , Item No16 ) 15 Surfingboardprovidingandfixingofsurfing Boardofsizenotlessthan1000mm ( Length ) X 600Mm ( Width ) X1400mm ( Height ) , To Buildup The Muscle Groups Of The Waist, Enhance The Body Coordinationandflexibility.Themainstructure Frameshall Bemadefrom G.I.Pipe Minimumof 80NbCClassweldedwithm.S.Roundbase Plate Atleast 0250 Mm & 10Mm Thick. The Footrestsshallbemadefromhighqualityfiber Reinforced Plastic Material. High Tensile Steel With Galvanizednutboltsshallbeusedforassembly. Thepowdercoatingshallbedonewithpure Polyester Powder Of Ackzonoble / Berger / Nerolac With Minimum 60 To 70 Micron Thickness, Completeinallrespectincludingfixingthem.S. Holdfastincementconcretetoholdthewhole Structure, Underthedirectionsofengineer-In- Chargetofullfilthefunctionalrequirement.The Indicativedesign / Photoisasperenclosedphoto No. 1. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 16 Cross Trainer Providing And Fixing Of Cross Trainerofsizenotlessthan1320mm ( Length ) X 600Mm ( Widux1750mm. ( Height ) , To Enhance The Mobility Of Upper And Lower Limbs And Improve The Flexibility Of Joints. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80N C Class Weldedwithm.S.Roundbaseplateatleast0250 Mm&10Mmthick.Thehandframeshallbe Made Up Of Atleast 25Nb C Class G.I. Pipe. The Footrestsshallbemadefremaluminumcasting Material Of Size Not Less Than 130 Mm X 310Mmx5mm Thickness A Mounted On M.S. Plate Ofsize 130Mmx310mmx3mm Thick. High Tensile Steel With Galvaniz ( 3:23 Pm, 25 / 02 / 2022 ] Prasoon: Nuts And Bolts Shall Be Used For Assembly [ 3:32 Pm, 25 / 02 / 2022 ] Prasoon:Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powdersofackzonoble / Berger / Nerolacpaints With60to70micronthickness, Completeinall Respect Including Fixing The M.S. Holdfast In Cementconcretethedirectionsofengineer-In- Charge To Fullfil. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . ( As Per Approved By Director Wdsc , Jaipur Wide Letter No . 6329-443 Dated 04.03.2022 ) 17 Thai-Chispinner ( 2 Wheel ) Providingand Fixing Of Thi-Chi Spinner ( 2 Wheel ) Of Size Not Lessthan700mm ( Length ) X1000mm ( Width ) X 1280Mun ( Height ) , To Increase Mobility Of Shoulder-Elbowandhip-Kce.Themainstructure Frameshall Bemadefrom G.I.Pipe Minimumof 80NbCClassweldedwithm.S.Roundbase Plate Atleast 0250 Mm & 10Mm Thick. High Tensiles.S.Nutboltsshallbeusedforassenmbly, The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble / Berger / Nerolac Paints With60to70micronthickness, Completeinall Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under Thedirectionsofengineer-In-Chargetofiulfilthe Functionalrequirement.Theindicative Design / Photo Is As Per Enclosed Photo No. 3. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . ( As Per Approved By Director Wdsc, Jaipur Wide Letter No . 6329-443 Dated 04.03.2022 ) 18 Seated Puller Providing And Fixing Of Pipe HinimuniofsonrCElassweldedwithms. Round Base Plate Atlcast 250 Mm & 10Mnm Th?Ck, The Handle Frame Shall Be Miniman 2Nb C Class Gl. Pine, The Seat Frame Minimum Of 32Nb C Cass . Pipe, Closing Caps Shall Be Made Up Of High Qualityfiberreinforcedplasticmaterial. High Fensile Steel With Galvanized Nuts & Bolts Shall Be Used For Assembly. The Wder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble Berger / Nerolaepaintswith60to70micron Thickness, Complete In All Respect Including Fixing Them.S.Holdfastincementconcretetoholdthe Wholestructure, Underthedirectionsofengineer- In-Charge To Fullfil The Functional Requirement. The Indicativedesign / Photoisasperenclosedphoto No. 4. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 19 Leg Press Providing And Fixing Of Leg Press Of Sizenotlessthan1840mm ( Length ) X360mm ( Width ) X1560mm. ( Height ) , Tobuildupthe Muscles Of Thigh And Enhance The Strength Of Waist. The Main Structure Frame Shall Be Made From G.I. Pipeminimumof80nbCClassweldedwithm.S. Round Base Plate Atleast 0250 Mm & 1Omm Thick. The Sleeve Frame Minimum Of 100 Od And Of M.S. Seamless Pipe With Thickness Smm. This Sleeveshouldbedisassembledfrommainframe. The Footrests Shall Be Made From Casted Aluminum Material, Havingsizesminimumof130mmx 310Mm X 5Mm Thick. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nut Bolts Shall Be Usedforassembly.Thepowdercoatingshallbe Done Withpure Polyesterpowder Ofackzonoble / Berger / Nerolacwith60to70micronthickness, Completeinallrespectincludingfixingthem.S. Holdfastincementconcretetoholdthewhole Structure, Underthedirectionsof Engineer-In- Chargetofullfilthefunctionalrequirement.The Indicativedesign / Photoisasperenclosedphoto No. 5. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 20 Sit Up Board Double Providing And Fixing Ofsitupboarddoubleofsizenotlessthan 1760Mm ( Length ) X1140mm ( Width ) X660mm ( Height ) , To Enhance The Flexibility Of Whole Body, The Main Structure Frame Shall Be Made From G.I. Pipeminimumof80nbCClassweldedwithm.S.Round Base Plate Atleast 0250 Mm & 10Mm Thick.Theremainingframeofthesitupboard Minimumof32mmnbshall BemadefromC Classglpipe.Thepowdercoatingshallbedone Withpurepolyesterpowderackzonoble / Berger / Nerolacpaintswith60to70micronthickness, Completeinallrespectincludingfixingthem.S. Holdfastincementconcretetoholdthewhole Structure, Under The Directions Of Engineer-In- Chargetofullfilthefunctionalrequirement.The Indicativedesign / Photoisasperenclosedphoto No. 6. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 21 Chestpressprovidingandfixingofchest Pressofsizenotlessthan2000mm ( Length ) X 710Mm ( Width ) X 2200Mm, ( Height ) , To Enhance Thestrengthofupperlimbsandthemusclesin Chest & Back And Promotecardiopulmonary Function. The Main Structure Frame Shall Be Made Fromg.I. Pipeminimumof 80NbCClass Welded With M.S. Round Base Plate Atleast 250 Mm & Scanned 10Mm Thick The Handle Frame Shall Be Madeupfromaleast32nbcelassgipipe.The Seatsandbackreststobefinedontheouter Frames Shall Be Made Y Of Ms. Sheet Of Tie Not Less Thin310mm X3002mmthicknessclosing Cipu Thallbemadespofhighquality Fiberreinferced Paenic Material. H Tenole Itrel Sith Galvanized Muts &Boltsshallheusedrrssembythepowdr Coating Chall Be Done With Pure Polyester Pewders From Ackeevhle Berger / Nerolac Paints With 60 To79micrenthickness, Completerepectincluding Fixingthem.S.Holdtinemenconcreteeeldthe Wholestructure, Underthedirectionsofengineer- In Charge To Fullfil The Finctional Requirement. The Indicativedesignphotoisasperenclosedphoto No.7. ( Thecementvcreteandexcavationwork Thallbepaidseparately ) . ( Asperapprovedby 22 Pommel Horse Providing And Fixing Of Pommelhorseofsizenotlessthan2150mm ( Length ) X 800Mm ( Width ) X 800Mm. ( Height ) , To Enhancetheflexibilityoflowerlimbs, Waistand Abdomen. The Main Structure Frame Shall Be Made Fromg.Ilpipeminimumof80nbCClass Weldedwithm.S.Roundbaseplateatleast0250 Mm & 10Mm Thick. The Handle Frame Be Minimumof32nb Shall Be Made From Cclassg.I. Pipe. Closing Caps Shall Be Thade Up Ofhigh Qualityfiberreinforcedplasticmaterial. High Tensile Steel With Galvanized Nuts And Bolts Shall Be Usedforassembly.Thepowdercoatingshallbe Donewithpurepolyesterpowderackzonoble / Berger / Nerolac Paints With 60 To70 Micron Thickness, Complete In All Respect Including Fixing Them.S.Holdfastincementconcretetoholdthe Wholestructure, Underthedirectionsofengineer- In Charge To Fullfil The Functional Requirement. The Indicativedesign / Photoisasperenclosedphoto No. 8. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 23 Chestcumshoulderprtesprovidingandfixingofchestpresscumseatedpullerof Sizenotlessthan2000mmlength ) X710mm ( Width ) X2200mm ( Height ) , Toenhanicethe Strengthofupperlimbsandthemusclesinchest Andshoulder.Themainstructureframeshallbe Made From G.I. Pipe Minimum Of 8Onb C Class Weldedwithm.S.Roundbaseplateatleast0250 Mm & 10Mm Thick. The Seats And Back Rests To Be Fitted On Theouter Framesshallbemadeup Minimumofm.S.Sheetofsize330mmx300 Mmx2mum Thickness. Closing CapsVhall Be Made Up Of High Quality Fiber Reinforced Plastic Material, Hightensilesteelwithgalvanizednuts&Bolts Shallbeusedforassembly.Thepowdercoating Shallbedonewithpurepolyesterpowdersfrom Ackzonoble / Berger Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In- Charge To Fullfil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosedphotono.Ii ( Thecementconcreteand Excavation Work Shall Be Paid Separately ) , ( As Per Approved By Director Wdsc , Jaipur Wide Letter 24 Pushupbarsprovidingandfixingofpush Up Bars Of Size Not Less Than 1220Mm ( Length ) X 550Mm ( Width ) 1700Mm. ( Height ) , Toenhance Thestrengthandstaminaofthebody.Themain Structureframeshallbemadefromg.L.Pipe Minimumof80nbCClassweldedwithm.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. Thehandleframeminimumof25nbshallbe Made From C Class G.I. Pipe. Closing Caps Shall Be Made Up Of High Quality Fib Nuts & Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble / Berger / Nerolacpaintswith60to70micron Thickness, Complete In All Respect Including Fixing Them.S.Holdfastincementconcretetoholdthe Wholestructure, Underthedirectionsofengineer- In-Charge To Fullfil The Functional Requirement. The Indicativedesign / Photoisasperenclosedphoto No. 12. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 25 ( 1.1 ) Different Varrities Of Shrubs 600 Mm To 900 Mm. ( Itme No 1.11.3 ) 26 Preparationofbedsforbedgingandshrubbaryby Excavating60cms.Deepandtrenchingtheexcavated Base To A Further Depth Of 30 Cms. Refilling The Excavated Earthafterbreakingclods&Mixingwith Manure In The Ratio 8 :1 ( 8 Parts Of Stacked Valume Of Earthafterreductionby20%Onepartofstacking Valume Of Manure After Reduction By 8% Flooding With Water Filling With Earth If Necessary ( Cost Of Manure Of Extraearthtobepaidforseperately ) . ( Asperpwdbsr 2019 , Chapter H-2, Item No 2.1.9 ) 27 Planting Of Trees / Shurbs / Hedge & Climbers Plants Atdesireddistanceinarow&Watering. ( Asperpwd Bsr 2019, Chapter H-3, Item No 3.3 ) 28 ( 4.1 ) In Hard Soilbsr Wrd 2020, Item No 1 C 29 4.1Inrows 5Cms. Apartin Eitherdirection . ( Itmeno3.1.3 ) 30 ?????? ??? ??? 1 ?????? : 2 ???? : 4 ????? ???????? ?????? ??? 12 ???? ????? ??? ?? ???????? ????? ?????, ?? ??? ??? ???? ??? ???? ? ( As Per Rdbsr 2021 , Item No16 ) 31 Surfingboardprovidingandfixingofsurfing Boardofsizenotlessthan1000mm ( Length ) X 600Mm ( Width ) X1400mm ( Height ) , To Buildup The Muscle Groups Of The Waist, Enhance The Body Coordinationandflexibility.Themainstructure Frameshall Bemadefrom G.I.Pipe Minimumof 80NbCClassweldedwithm.S.Roundbase Plate Atleast 0250 Mm & 10Mm Thick. The Footrestsshallbemadefromhighqualityfiber Reinforced Plastic Material. High Tensile Steel With Galvanizednutboltsshallbeusedforassembly. Thepowdercoatingshallbedonewithpure Polyester Powder Of Ackzonoble / Berger / Nerolac With Minimum 60 To 70 Micron Thickness, Completeinallrespectincludingfixingthem.S. Holdfastincementconcretetoholdthewhole Structure, Underthedirectionsofengineer-In- Chargetofullfilthefunctionalrequirement.The Indicativedesign / Photoisasperenclosedphoto No. 1. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 32 Cross Trainer Providing And Fixing Of Cross Trainerofsizenotlessthan1320mm ( Length ) X 600Mm ( Widux1750mm. ( Height ) , To Enhance The Mobility Of Upper And Lower Limbs And Improve The Flexibility Of Joints. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80N C Class Weldedwithm.S.Roundbaseplateatleast0250 Mm&10Mmthick.Thehandframeshallbe Made Up Of Atleast 25Nb C Class G.I. Pipe. The Footrestsshallbemadefremaluminumcasting Material Of Size Not Less Than 130 Mm X 310Mmx5mm Thickness A Mounted On M.S. Plate Ofsize 130Mmx310mmx3mm Thick. High Tensile Steel With Galvaniz ( 3:23 Pm, 25 / 02 / 2022 ] Prasoon: Nuts And Bolts Shall Be Used For Assembly [ 3:32 Pm, 25 / 02 / 2022 ] Prasoon:Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powdersofackzonoble / Berger / Nerolacpaints With60to70micronthickness, Completeinall Respect Including Fixing The M.S. Holdfast In Cementconcretethedirectionsofengineer-In- Charge To Fullfil. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . ( As Per Approved By Director Wdsc , Jaipur Wide Letter No . 6329-443 Dated 04.03.2022 ) 33 Thai-Chispinner ( 2 Wheel ) Providingand Fixing Of Thi-Chi Spinner ( 2 Wheel ) Of Size Not Lessthan700mm ( Length ) X1000mm ( Width ) X 1280Mun ( Height ) , To Increase Mobility Of Shoulder-Elbowandhip-Kce.Themainstructure Frameshall Bemadefrom G.I.Pipe Minimumof 80NbCClassweldedwithm.S.Roundbase Plate Atleast 0250 Mm & 10Mm Thick. High Tensiles.S.Nutboltsshallbeusedforassenmbly, The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble / Berger / Nerolac Paints With60to70micronthickness, Completeinall Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under Thedirectionsofengineer-In-Chargetofiulfilthe Functionalrequirement.Theindicative Design / Photo Is As Per Enclosed Photo No. 3. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . ( As Per Approved By Director Wdsc, Jaipur Wide Letter No . 6329-443 Dated 04.03.2022 ) 34 Seated Puller Providing And Fixing Of Pipe HinimuniofsonrCElassweldedwithms. Round Base Plate Atlcast 250 Mm & 10Mnm Th?Ck, The Handle Frame Shall Be Miniman 2Nb C Class Gl. Pine, The Seat Frame Minimum Of 32Nb C Cass . Pipe, Closing Caps Shall Be Made Up Of High Qualityfiberreinforcedplasticmaterial. High Fensile Steel With Galvanized Nuts & Bolts Shall Be Used For Assembly. The Wder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble Berger / Nerolaepaintswith60to70micron Thickness, Complete In All Respect Including Fixing Them.S.Holdfastincementconcretetoholdthe Wholestructure, Underthedirectionsofengineer- In-Charge To Fullfil The Functional Requirement. The Indicativedesign / Photoisasperenclosedphoto No. 4. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 35 Leg Press Providing And Fixing Of Leg Press Of Sizenotlessthan1840mm ( Length ) X360mm ( Width ) X1560mm. ( Height ) , Tobuildupthe Muscles Of Thigh And Enhance The Strength Of Waist. The Main Structure Frame Shall Be Made From G.I. Pipeminimumof80nbCClassweldedwithm.S. Round Base Plate Atleast 0250 Mm & 1Omm Thick. The Sleeve Frame Minimum Of 100 Od And Of M.S. Seamless Pipe With Thickness Smm. This Sleeveshouldbedisassembledfrommainframe. The Footrests Shall Be Made From Casted Aluminum Material, Havingsizesminimumof130mmx 310Mm X 5Mm Thick. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nut Bolts Shall Be Usedforassembly.Thepowdercoatingshallbe Done Withpure Polyesterpowder Ofackzonoble / Berger / Nerolacwith60to70micronthickness, Completeinallrespectincludingfixingthem.S. Holdfastincementconcretetoholdthewhole Structure, Underthedirectionsof Engineer-In- Chargetofullfilthefunctionalrequirement.The Indicativedesign / Photoisasperenclosedphoto No. 5. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 36 Sit Up Board Double Providing And Fixing Ofsitupboarddoubleofsizenotlessthan 1760Mm ( Length ) X1140mm ( Width ) X660mm ( Height ) , To Enhance The Flexibility Of Whole Body, The Main Structure Frame Shall Be Made From G.I. Pipeminimumof80nbCClassweldedwithm.S.Round Base Plate Atleast 0250 Mm & 10Mm Thick.Theremainingframeofthesitupboard Minimumof32mmnbshall BemadefromC Classglpipe.Thepowdercoatingshallbedone Withpurepolyesterpowderackzonoble / Berger / Nerolacpaintswith60to70micronthickness, Completeinallrespectincludingfixingthem.S. Holdfastincementconcretetoholdthewhole Structure, Under The Directions Of Engineer-In- Chargetofullfilthefunctionalrequirement.The Indicativedesign / Photoisasperenclosedphoto No. 6. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 37 Chestpressprovidingandfixingofchest Pressofsizenotlessthan2000mm ( Length ) X 710Mm ( Width ) X 2200Mm, ( Height ) , To Enhance Thestrengthofupperlimbsandthemusclesin Chest & Back And Promotecardiopulmonary Function. The Main Structure Frame Shall Be Made Fromg.I. Pipeminimumof 80NbCClass Welded With M.S. Round Base Plate Atleast 250 Mm & Scanned 10Mm Thick The Handle Frame Shall Be Madeupfromaleast32nbcelassgipipe.The Seatsandbackreststobefinedontheouter Frames Shall Be Made Y Of Ms. Sheet Of Tie Not Less Thin310mm X3002mmthicknessclosing Cipu Thallbemadespofhighquality Fiberreinferced Paenic Material. H Tenole Itrel Sith Galvanized Muts &Boltsshallheusedrrssembythepowdr Coating Chall Be Done With Pure Polyester Pewders From Ackeevhle Berger / Nerolac Paints With 60 To79micrenthickness, Completerepectincluding Fixingthem.S.Holdtinemenconcreteeeldthe Wholestructure, Underthedirectionsofengineer- In Charge To Fullfil The Finctional Requirement. The Indicativedesignphotoisasperenclosedphoto No.7. ( Thecementvcreteandexcavationwork Thallbepaidseparately ) . ( Asperapprovedby 38 Pommel Horse Providing And Fixing Of Pommelhorseofsizenotlessthan2150mm ( Length ) X 800Mm ( Width ) X 800Mm. ( Height ) , To Enhancetheflexibilityoflowerlimbs, Waistand Abdomen. The Main Structure Frame Shall Be Made Fromg.Ilpipeminimumof80nbCClass Weldedwithm.S.Roundbaseplateatleast0250 Mm & 10Mm Thick. The Handle Frame Be Minimumof32nb Shall Be Made From Cclassg.I. Pipe. Closing Caps Shall Be Thade Up Ofhigh Qualityfiberreinforcedplasticmaterial. High Tensile Steel With Galvanized Nuts And Bolts Shall Be Usedforassembly.Thepowdercoatingshallbe Donewithpurepolyesterpowderackzonoble / Berger / Nerolac Paints With 60 To70 Micron Thickness, Complete In All Respect Including Fixing Them.S.Holdfastincementconcretetoholdthe Wholestructure, Underthedirectionsofengineer- In Charge To Fullfil The Functional Requirement. The Indicativedesign / Photoisasperenclosedphoto No. 8. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) 39 Standingelating Twister Providingand Fixing Ofscating & Standing Twister Ofsize Not Leas Than 1700Mm ( Length ) X 540Mm ( Width ) X1250mm. ( Height ) , Toenhanceflexibilityof Waist. Suitable For People Ofdifferent Ages Except Children, The Main Structure Frame Shall Be Made From G.I Pipe Minimum Of 80Nb C Class Welded Withm.S.Roundbaseplateatleast0250mm& 10Mmthick.The Bottomframe Ofthe Seating & Standing Twister Be Atleast Of 32 Nb, 50 N, And 25 Nbshall BemadefromCClassg.L Pipe.The Handleframeofscating&Standingtwisterof Minimum 25 Nb & Foot Resting Frame Ofseating SideshallbemadefromCClassg.Lpipe Minimumof25mmnbthetwisterplatetobe Fittedonthebottomframeshallbemadeupof Ms. Round Plate Of Minimum Size 300Mm Diameter And 10Mm Thickness Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts & Boltsshallbeusedforassembly.Thepowder Coating Shall Be Done By Pure Polyester Powder Of Ackzonoble / Berger / Nerolac Paint With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold 40 Chestcumshoulderprtesprovidingandfixingofchestpresscumseatedpullerof Sizenotlessthan2000mmlength ) X710mm ( Width ) X2200mm ( Height ) , Toenhanicethe Strengthofupperlimbsandthemusclesinchest Andshoulder.Themainstructureframeshallbe Made From G.I. Pipe Minimum Of 8Onb C Class Weldedwithm.S.Roundbaseplateatleast0250 Mm & 10Mm Thick. The Seats And Back Rests To Be Fitted On Theouter Framesshallbemadeup Minimumofm.S.Sheetofsize330mmx300 Mmx2mum Thickness. Closing CapsVhall Be Made Up Of High Quality Fiber Reinforced Plastic Material, Hightensilesteelwithgalvanizednuts&Bolts Shallbeusedforassembly.Thepowdercoating Shallbedonewithpurepolyesterpowdersfrom Ackzonoble / Berger Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In- Charge To Fullfil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosedphotono.Ii ( Thecementconcreteand Excavation Work Shall Be Paid Separately ) , ( As Per Approved By Director Wdsc , Jaipur Wide Letter 41 Pushupbarsprovidingandfixingofpush Up Bars Of Size Not Less Than 1220Mm ( Length ) X 550Mm ( Width ) 1700Mm. ( Height ) , Toenhance Thestrengthandstaminaofthebody.Themain Structureframeshallbemadefromg.L.Pipe Minimumof80nbCClassweldedwithm.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. Thehandleframeminimumof25nbshallbe Made From C Class G.I. Pipe. Closing Caps Shall Be Made Up Of High Quality Fib Nuts & Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble / Berger / Nerolacpaintswith60to70micron Thickness, Complete In All Respect Including Fixing Them.S.Holdfastincementconcretetoholdthe Wholestructure, Underthedirectionsofengineer- In-Charge To Fullfil The Functional Requirement. The Indicativedesign / Photoisasperenclosedphoto No. 12. ( The Cement Concrete And Excavation Work Shallbepaidseparately ) . ( Asperapprovedby Directorwdsc, Jaipurwideletterno.6329- 443 Dated 04.03.2022 ) . Last date of submission for this tender is 2022-04-12. This is a Cutting Crimping And Punching Tools tender in Sikar, Rajasthan