Panchayat Raj Department

Panchayat Raj Department has published Tender For Construction Work Of Class Room In Raipuravi Hindia; 1 Site Clearing work 2 Dressing the ground surface by cutting the soil upto an average of 15 cm and removing vegetation and small plants and lifting the waste material and garbage upto a distance of 1.5 m and dumping it upto a distance of 50 m. 3 Digging the soil upto a depth of 1.5 m in foundation, trench, drain, tamping the bottom, pouring water, dressing the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposing of the remaining soil upto a distance of 50 m. 4 Putting 40 mm nominal size stone aggregate (crusher broken)/brick soil in cement-sand mixture in the ratio of 1 cement : 4 sand : 8 aggregate and tamping, including tamping. 5 Laying of stones in foundation and plinth in cement-gravel mixture, including filling of side cracks and tamping etc. Cement Gravel 1:8 6 Laying of stones in foundation and plinth in cement-gravel mixture, including filling of side cracks and tamping etc. Cement Gravel 1:6 7 Putting excavated soil/sand in foundation and plinth upto 50 meter distance (lead) and leveling, adding water and tamping with a mortar. 8 Putting and supplying cement concrete of 1:2:4/1:1.5:3 mixture in reinforced cement concrete, pressing in roof slabs, eaves, beams, lintels etc., tamping and leveling the surface with 1:3 cement mixture etc. including scaffolding but cost of steel and shuttering separately. 9 Centering/Shuttering (Lambardment and Casting) for RCC roof, slab, balcony, lintel etc. upto 4.5 m height and removal etc. as per specifications. 10 Cutting, bending and setting and fastening of iron for RCC work including supply. 11 Supply of stone lintel and fixing it in mortar used in masonry. 100 to 150 mm thickness. 12 Add-on amount, in superstructure masonry, item no. 21 to 24, for plinth and thickness more than 30 cm upto 4.5 m height. 13 Add-on amount, in superstructure stone pillars square or rectangular upto 90 cm length. 14 Cutting and mounting of iron girders and On spot installation upto 4.5 m height. 15 Laying and supplying of rough stone sills, sills and coping in cement mortar 1:4, 50 to 75 mm thickness 16 Laying of roofing of top quality stone slabs, filling with cement mortar in 1:4 ratio with stone arch at joints at top and bottom, 2.4 m to 3.0 m span 17 Laying of cement concrete screed (1 part cement : 3 parts gravel : 6 parts 12 mm measured aggregate) of 90mm average thickness, including tamping and leveling. 18 Laying of 22 gauge plain GI in outer frame of 40X40X3 mm angle iron Supply and installation of 2 pane sheet door of 25X25X3 mm in angle iron frame with MS sheet along with fittings like argal sliding bolt, latches and holding strips etc. 19 Supply and installation of 2 pane sheet window of 22 gauge plain sheet in angle iron frame of 25X25X3 mm along with 10 mm grill, 3 mm glass and MS sheet along with fittings like argal sliding bolt, latches and holding strips etc. 20 Supply and installation of 14 mesh, 24 gauge iron mesh in iron window and installation with 20 X 3 mm beading and tightening with screws. 21 Iron work in grills/gates etc. including cutting, mounting and fixing of flat cones, T and channel etc. 22 Cement plaster on wall by mixing cement-gravel in 1:6 ratio, scraping joints and regular watering for 14 days. 23 In cement concrete foundation or floor, put 40 mm nominal size stone aggregate (crusher broken) / brick aggregate in cement-sand mixture in the ratio of 1 cement: 5 sand: 10 soil and ramming, including watering. 24 Laying and supply of Rajnagar II Quality Marble, cutting of marble and fixing it on 20 mm 1:4 mixture, joining edges with white cement, grinding (minimum 3 times), including polishing. Upto 900 sq. cm. 25 Flat or ruled layer on stone or brick work in 1:3 ratio of cement gravel mixture with regular drying for 14 days. 26 Whitewash work in 3 layers to give even shade on new work/old work, rubbing, surface preparation etc. with complete scaffolding. 27 Whitewash work in 3 layers to give even shade on new work/old work. 28 Applying enamel paint in 3 layers to give even shade to create even surface on new work/old work. 29 Cement concrete 1:2:4 mixture of 1 cement, 2 gravel and 4 layers of stone or brick in 12 m. Including mixing with named ballast, tamping, pressing and leveling etc. 30 Laying of 110 mm diameter PVC pipe along with other necessary material 31 name plate 32 Electric light fitting. Last date of submission for this tender is 2025-03-17. This is a Building Work tender in Barmer, Rajasthan