Local Self Government Department

Local Self Government Department has published Bids Are Invited For Facility Management Services - Lumpsum Based - Supply And Installation Of Manlapene Hdpe Opengym Items As Per Specification On Lumsump Basis; Supply And Installation Of Manlapene Hdpe Opengym Items As Per Specification On Lumsump Basis; Consumables T --PROVIDING AND FIXING CROSS TRAINER including fitting and FIXTURES, CIVIL WORKS AND REQUIRED SAND PIT FILLED WITH APPROVED SAND WORK TO BE DONE AS PER THE INSTRUCTION OF ENGINEER INCHARGE AND SPECIFICATION GIVEN BELOW DIMENSIONS:-1320mm (Length) x 600mm (Width) x 1750mm. (Height). SAFE AREA: 1.77 x 1.2Mtr. Cross trainer equipment made from B Class G.I. Pipe of different NB. The main frame Pipes are of 80NB B Class G.I. Pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of Ø250 mm & 10mm thick. The Handle Frame is made up of 25NB B Class G.1. Pipe. The foundation used for fixing is a structure and made from center pipe of G.J. of 80 NB B class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Seats, Footrests, And Endcaps Are Composed Of High-Quality M.HDPE Material (Anti-Uv). Anchor Fasteners Are M10/M12, Sbr Rubber Grips, And Bearings Are Made Of Ss 304 From Skf Or An Equivalent Brand. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mm x 310mm x 3mm thick closing Caps are made up of high quality M.HDPE material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright. The Bearings used are of 6007zz 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. PROVIDING AND FIXING SEATED PULLAR including fitting and FIXTURES, CIVIL WORKS AND REQUIRED SAND PIT FILLED WITH APPROVED SAND WORK TO BE DONE AS PER THE INSTRUCTION OF ENGINEER INCHARGE AND SPECIFICATION GIVEN BELOW DIMENSIONS:-1900mm (Length) x 740mm (Width) x 1920mm. (Height). SAFE AREA-1.2Mtr X 3MU Seated puller equipment made up of B Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The center pipe is of 100NB made from B Class G.I. pipe. Bottom support is of M.S. round plate of Ø 250 mm & 10mm thickness is welded. All linkages are made up of 25NB B class G.L. pipe. The handle frame is of 32NB B class G.I. pipe. The seat frame is of 32NB B class G.I. pipe, To build structure bushes are used which are made from seamless pipe of 60mm U.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB B class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from M.HDPE Material with 0.7 mm Thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Seats, Footrests, And Endcaps Are Composed Of High-Quality M.HDPE Material (Anti-Uv). Anchor Fasteners Are M10/M12, Sbr Rubber Grips, And Bearings Are Made Of Ss 304 From Skf Or An Equivalent Brand. Closing Caps are made up of high quality M.HDPE material., PROVIDING AND FIXING ROWER including fitting and FIXTURES, CIVIL WORKS AND REQUIRED SAND PIT FILLED WITH APPROVED SAND WORK TO BE DONE AS PER THE INSTRUCTION OF ENGINEER INCHARGE AND SPECIFICATION GIVEN BELOW DIMENSIONS:-1200mm (Length) x 1000mm (Width) x 920mm. (Height) SAFE AREA:-1.5Mtr. x 1.5Mtr. Rower Equipment made from B Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The Main frame is of 80NB B class G.J.. Pipe welded with M.S. round plate of 250mm X 10mm. The handle frame 25NB is made from B class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB B class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 min X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. To join the movement frame to main frame connecting links made up from 32 NB G.I. B class pipe. The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.. Last date of submission for this tender is 2025-09-25. This is a Facility Management tender in Jodhpur, Rajasthan