Rail Coach Factory

Rail Coach Factory has published Supply Of Steel Sheet Of Size 15X2500x6400mm., As Per Drawing / Specification: Din En 10025-5 S355 J2w+N. Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A- 578 ( Reapproved 2001 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A- 578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Up To 2Mm Thickness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corrosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimum Of 2 Hoops Up To 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damage & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 8X2500x4500mm., As Per Drawing / Specification : Din En 10025-5 S355j2w+N.Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A- 578 ( Reapproved 2001 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A- 578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Up To 2Mm Thickness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corrosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimum Of 2 Hoops Up To 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damage & Corrosion During Transit If Any Shall Be At The Cost Of Supplier [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 10X2500x6800mm., As Per Drawing / Specification: Din En 10025-5 S355 J2w+N. Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A- 578 ( Reapproved 2001 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A- 578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Up To 2Mm Thickness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corrosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimum Of 2 Hoops Up To 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damage & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 12X2500x6300mm., As Per Drawing / Specification: Din En 10025-5 S355 J2w+N. Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A- 578 ( Reapproved 2001 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A- 578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Up To 2Mm Thickness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corrosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimum Of 2 Hoops Up To 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damage & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 6X1250x3200mm., As Per Drawing / Specification: Din En 10025-5 S355 J2w+N. Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A- 578 ( Reapproved 2001 ) . The Acceptance Standard Shall Be Level B ( Para 8 Of Astm-A- 578 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scanning Shall Be Continuous Over 100% Of Palte Surface., Packing Instruction: I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Up To 2Mm Thickness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corrosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimum Of 2 Hoops Up To 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damage & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] , Steel Sheet Of Size 20X2500x6400mm., As Per Drawing / Specification: Din En 10025-5 S355 J2w+N. Specifcation For Ultrasonic Testing Of Steel Plates Shall Be Astm-A- 578 ( Reapproved 2001 ) With Frequency 100% ( All The Plates Shall Be Ut Testing ) , Scannning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: I ) Plates Above 5Mm Shall Be Supplied With Reasonable Packing With Metal Strapping For Handling During Transit And Storage. Ii ) The Sheets / Plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.All The Sheets Up To 2Mm Thickness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing To Is: 1154 And All The Sheets / Plates Above 2Mm Shall Be Protected Against Corrosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii ) All Bundles Shall Have A Minimum Of 2 Hoops Up To 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Iv ) Optimum Weight Of The Bundle Should Be 2Mt+-10%. Mechanical Damage & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] . Last date of submission for this tender is 2023-08-04. This is a Sheet tender in Kapurthala, Punjab