Indian Institute Of Technology

Indian Institute Of Technology has published Tender For Repair Of Boundary Wall At Various Locations Of Iit Ropar; 1 Civil Works 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 3 All kinds of soil. 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 5 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 6 Centering and shuttering including strutting, propping etc. and removal of form work for : 7 Foundations, footings, bases for columns. 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 9 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) 10 Centering and shuttering including strutting, propping etc. and removal of form for 11 Lintels, beams, plinth beams, girders, bressumers and cantilevers 12 Columns, Pillars, Piers, Abutments, Posts and Struts 13 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 14 Thermo-Mechanically Treated bars of grade Fe-500D or more. 15 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 16 Cement mortar 1:6 (1 cement : 6 coarse sand) 17 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 18 Cement mortar 1:6 (1 cement : 6 coarse sand) 19 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 20 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 21 Two or more coats on new work 22 Welding by gas or electric plant including transportation of plant at site etc. complete. 23 CEMENT PLASTER (IN FINE SAND) 24 12 mm cement plaster of mix : 25 1:6 (1 cement: 6 fine sand) 26 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 27 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 28 In cement mortar 29 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): 30 From brick work in cement mortar 31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 32 Flush / Ruled/ Struck or weathered pointing 33 Finishing walls with Acrylic Smooth exterior paint of required shade : 34 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 35 Finishing walls with Acrylic Smooth exterior paint of required shade : 36 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)on existing cement paint surface 37 Same as Item no 6.4.2, in case Bricks supplied by IIT Ropar. . Last date of submission for this tender is 2024-09-05. This is a Earth Moving Machinery tender in Rupnagar, Punjab