Department Of Pharmaceuticals

Department Of Pharmaceuticals has published Bids Are Invited For Supply Installation Testing And Commissioning Of Split Ac Machines ( Hot And Cold ) Qty 16 Nos With Accessories And Allied Works At Niper , Sas Nagar-- Supply/installation/testing/commissioning of split Airconditioner (hot and cold) with indoor , outdoor unit, interconnecting copper tubing ,insulation , interconnecting wiring , etc in complete as per site requirement to provide rated cooling and heating as per specifications laid : Item No.2 Providing, installation, commissioning and testing at site Electronic voltage stabilizer, single phase ,50 Hz, IC tech, copper wound ,ISI specified Voltage fluctuation range : 170 to 270 V(minimum), Digital display Ammeter/Voltmeter, built in thermal protection, under and over voltage cut out ,standard length of wire 3cx2.5mm2 warranty period – 2 years Capacity 5 KVA No. 16 Item No.3 Providing, installation, commissioning and testing of Copper Tubing 18 G with nitrile tube insulation 6mm thick including fittings etc as applicable in addition to the standard length of 3m provided by OEM Copper Tubing set(5/8”+3/8or 1/4”) Metre 110 Item No.4 S/I/T/C of following sizes of FRLS PVC insulated copper conductor, multi core wire laying with electrical tie in tray , copper thimbled end connections as per the standard sizes from indoor to outdoor units and from main supply point to stablizer on wall / pvc conduit as per site requirment to the satisfaction of engineer-in-charge , NIPER . 4(i) 3 core x 2.5mm² Metre 80 4(ii) 4 core x 2.5mm² Metre 110 Item No. 5 Providing, installation, commissioning and testing at site PVC moulded MCB DP with indicator, single phase, 50 Hz. As per site requirement . Capacity - 32 amp No. 16 Item No.6 Supply and installing following size of perforated hot dipped galvanised iron cable tray (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling/ mounted on wall with G.I. suspendereds including G.I. bolts & nuts. etc. as required. Item No. 7 Supply and installing following size of tray covers made from perforated hot dipped galvanised iron sheet 20 G (Galvanisation thickness not less than 50 micron )bended and cut to size . Cover to be screwed to the tray at distance of 0.3 mtr with . Self tapping steel screws 3/4. 7 (i) size 100 x 20 x 1.6mm Metre 20 7 (ii) size 150 x 20 x 1.6mm Metre 90 Item No. 8 Providing, installation of wall mounted MS stand heavy duty , powder coated made from MS Sheet 12 G duly bended to size for installation of outer unit of split AC on wall compelte with nuts ,bolts,washers, horizontal and vertical angle supports, dash fasteners dia ½”x 4”length - 6nos ,rubber pads -4 nos to fit with the outer unit (as per OEM standard) as per site requirement to the satisfaction of Engineer-in- charge . Support frame size as per OEM (Horizontal/Vertical ) Set 16 Item No. 9 Providing and fixing of MS work,riveted,bolted or welded inbuiltup sections, and frame work including cutting,hoisting,fixing in position and applying priming coat of approved steel primer all complete as per site requirement size 40x40x4mm Kg 120 Item No. 10 Minor works such as making hole in wall /frame with drill machine bit/chisel & hammer as required for laying of copper tubing, cable and drain line and making good the same with cement replastering /white cement joints and color washing as per site requirement to the satisfaction of Engineer-in-charge. Cum 1 Item No. 11 Extended yearly warranty period for repair and maintenance AC services inclusive of all spares such as PCB for indoor and outdoor units. Cooling coils, blower motor, Condensor coil, Condensor fan motor, Refrigerant , compressor, remote etc for complete unit at site for 07 nos units for period of 2 years effective from expiry of 1st year of warranty Total Quantity : 721. Last date of submission for this tender is 2023-05-16. This is a Drilling And Exploration Equipment tender in S.a.s Nagar, Punjab