Rural Works Department

Rural Works Department has published construction Repair & Renovation of works Ri Quarter At Pratapsasan For The Year 2025-26- 1 Dismantling of Brick or stone masonary in cement mortar under 3m height including stacking the useful materials for reuse & removing the debris within 50m lead complete as per the direction of Engineer – in Charge. 2 Earth work in excavation of foundation in all kinds of soil with all leads and lift including rough dressing breaking clods and leveling bed and depositing the excavated materials away from the working area etc.complete as per the direction of Engineer – in Charge. 3 Filling foundation and plinth with coarse river sand including watering and ramming etc. complete as per the direction of Engineer – in Charge. 4 Providing Cement concrete M-15 in Foundation/ Sub-Structure 40mm & down grade size crusher broken hard granite stone aggregates of approved quality from approved quarry including hoisting, lowering and laying in position, in layers with proper packing and ramming by means of vibrator to proper slope and level including cost, conveyance, royalty and taxes of all materials required for the owrk including hire & runing charges of machineries required for the work including all labour fro the work complete in all respect as per the specification and direction of the Engineer-in-charge. 5 Cement concrete (1:2:4) with 12 mm size C.B.H.G. chips for R.C.C. works including hoisting and laying per (To be used for minor repair work only) complete as per the direction of Engineer – in Charge. 6 R.C.C. work of M-25 grade with 20 mm and down grade black hard granite (C.B) stone chips including hoisting and laying complete as per the direction of Engineer – in Charge.i) Column 7 Roof Beam 8 Supplying cutting, bending, straightening,placing & binding of uncoated HYSD bar reinforcement complete as per drawing and technical specification complete as per the direction of Engineer – in Charge. 9 Fly ash brick Masonary with cement mortar (1:6) in superstructure including all cost and conveyance etc complete as per the direction of Engineer – in Charge. 10 Providing and fising ISI marked 35 mm thick flush door shutters conforming to 15 2202 (Part 1) decorative typs, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains of cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures ect complete as per the direction of Engineer – in Charge. 11 Supplying. fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures complete as per the direction of Engineer – in Charge. 12 Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2-0 center to center L section No. 1705 up to 15 micron on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminum grid 2-0 x 2-0 with prelaminated particle board suspended from ceiling etc. complete as per the direction of Engineer-in Charge. 13 16mm thick CP (1:6) including all cost and conveyance etc complete as per the direction of Engineer – in Charge. 14 Distempering two coats to walls with distemper of approved shade on old work to give an even shade exculding cost of distemper etc. complete as per the direction of Engineer – in Charge.m 15 Providing Weather coat two coats over acoat of primer of approved shade to give an even shade including cost of primer,weatger coat. etc. complete as per the direction of Engineer – in Charge. 16 Providing fitting & fixing of door & window fittings to be fixed by means steels screw including cost,conveyance and cost of all labour, T&P required for the work etc. Complete. as per direction of Engineer-In-Charge.i) Door Lock 17 ii) Door Closer 18 Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tilescomplete as per the direction of Engineer – in Charge. 19 Supplying, fitting, fixing iron shutters, M.S. window grill / grill gate etc. with all cost, carriage taxes etc. complete as per the direction of Engineer – in Charge. Gate 20 Painting two coats over a priming on new work including cost and conveyance of all materials to site and all labour charges complete as per the direction of Engineer – in Charge. Please Enable Macros to View BoQ information . Last date of submission for this tender is 2025-11-20. This is a Building Work tender in Khordha, Odisha