Rural Works Department

Rural Works Department has published construction Repair & Renovation of works - Asi Qtr. At Tangi For The Year 2025-26- 1 Removing old grading plaster from roof, removing the surface, lowering and removing the debris within 50m lead etc complete as per direction of Engineer-in-charge. 2 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work etc. complete as per specification and direction of the Engineer-in-Charge. 3 16 mm thick cement plaster in CM ( 1: 6) over brick work inside surface of the wall including cost carriage royalty taxes and watering & curring etc. complete as per specification and direction of the Engineer-in-Charge. 4 Painting two coats with good enamel paint over a coat of primer / red oxide on iron works including cost, conveyance & taxes of all materials, T&P, labour charges etc complete as per specification and direction of the Engineer-in-Charge. 5 Providing vitrified tile flooring using Vitrified tiles of dado premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance, loading,unloading, royalties and taxes of all materials,cost of all labour, sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. 6 Distempering two coats to walls with Distemper paint of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. 7 Finishing walls with water proofing Weather coat of approved shade on new work two coat to give an even shade including cost of paint etc. complete as per specification and direction of the Engineer-in-Charge. 8 Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centres standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. Please Enable Macros to View BoQ information . Last date of submission for this tender is 2025-11-20. This is a Building Work tender in Khordha, Odisha