National Aluminium Company Limited

National Aluminium Company Limited has published Bids Are Invited For 1 81802014530 160 M TECHNICAL SPECIFICATION : UNGALVANISED STEEL WIRE ROPE ROPE DIA:8MM CORE:IWRC(STEEL) CONFORMING TO IS:2266 CONSTRUCTION: 6X19 LAY:RHOL MAKE:USHA MARTIN (TO BE SUPPLIED IN SINGLE ROLLS LENGTH OF 160 MTRS.) NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. 2 81802025130 300 M TECHNICAL SPECIFICATION : STEEL WIRE ROPE 6X36 CONTRUCTION, IWRC(STEEL CORE). RHO LAY DIA: 14 MM TENSILE STRENGTH :1770N/MM² MINIMUM BREAKING FORCE:124 KN AS PER IS:2266 MAKE:USHA MARTIN. (TO BE SUPPLIED IN SINGLE ROLLS LENGTH OF 300 MTRS.) NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. 3 81802025200 200 M TECHNICAL SPECIFICATION : UNGALVANISED STEEL WIRE ROPE WIRE ROPE DIA: 18MM CORE: IWRC (STEEL) CONFIRMING TO IS:2266 CONSTRUCTION: 6 X 36 LAYING: R.H.O.L TENSILE STRENGTH: 1770N/NM2 (TO BE SUPPLIED IN SINGLE ROLLS LENGTH OF 200 MTRS.) MAKE:USHA MARTIN NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. 5 81802026250 150 M TECHNICAL SPECIFICATION : WIRE ROPE,SZ:12MM DIA.STRAND:6X36 USHA MARTIN MAKE UNGALVANISED STEEL WIRE ROPE, SIZE-12MM DIA, CONSTRUCTION 6X36, TENSILE STRENGTH N/MM2-1770 ,LAY-RHO CORE -IWRC(STEEL CORE) AS PER IS2266/77. TO BE SUPPLIED WITH SINGLE LENGTH OF 150 MTR. NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. 6 81802028320 60 M TECHNICAL SPECIFICATION : UNGALVANISED STEEL WIRE ROPE OF 6 MM DIAMETER AS PER IS 3459:2004 6 X 19 CONST, R.H.O. LAY, STEEL CORE IWRC ROPE GRADE:1960 N/MM SQUARE AS PER IS 3459:2004 MINIMUM BREAKING FORCE OF THE ROPE=23 KN. MAKE:USHA MARTIN (TO BE SUPPLIED IN SINGLE ROLLS LENGTH OF 60 MTRS.) NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. 7 81802042900 200 M TECHNICAL SPECIFICATION : USHA MARTIN MAKE UNGALVANISED STEEL WIRE ROPE,DIA: 20 MM, 6 X 36 CONSTRUCTION,IWRC (STEEL CORE), R.H.O.LAY TENSILE STRENGTH:1770 N/mm2 MINIMUM BREAKING FORCE: 252 KN AS PER IS: 2266 (TO BE SUPPLIED IN SINGLE ROLLS LENGTH OF 200 MTRS.) NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. 8 81802043570 120 M TECHNICAL SPECIFICATION : STEEL WIRE ROPE SIZE:22 MM DIA, 6 X 36 CONTRUCTION, R.H.O.LAY, STEEL CORE(IWRC) TENSILE GRADE: 1770 N/MM2, BREAKING FORCE:305 KN, COATING: UNGALVANISED AS PER IS: 2266/2002, MAKE:USHA MARTIN. TO BE SUPPLIED IN SINGLE ROLLS LENGTH OF 120 MTRS.) NOTE: 1. PARTY HAS TO SUPPLY THE MANUFACTURERS TEST CERTIFICATE FOR MINIMUM BREAKING FORCE ALONG WITH THE SUPPLY DOCUMENTS FOR THE ITEM. 2. VALID AUTHORIZATION CERTIFICATE MUST BE SUBMITTED DURING BID STAGE FOR TECHNICAL ACCEPTANCE. 3. Guarantee & Test Certificate shall be Submitted Along with Despatch documents. 4. THE ROPES SHALL BE PACKED WITH WOODEN WHEEL & GUNNY BAGS WITH PROPER DRESSING ENDS. 5. ALL THE ROPES SHALL BE COATED WITH GOOD QUALITY, ANTICORROSION & RUST PREVENTION DURING DESPATCH OF ROPES. 6. ANY RUSTING,LOOSE ROPE WIRES,SHARP END KINKING AND OTHER SURFACE DEFECTS SHALL BE LIABLE FOR REJECTION AT NALCOS STORE VENDORS SHALL ENSURE ADEQUATE CARE WHILE DESPATCHING ROPES. Total Quantity : 1190. Last date of submission for this tender is 2025-12-15. This is a Wire Rope tender in Anugul, Odisha