Municipal Bodies

Municipal Bodies has published Tender For Development Of Dolobhoga Khia Padia In Ward No-67; 1 Earth work excavationinall kinds of soil including rough dressing and leveling the bedand depositing the excavated materials at places away from the work site with all leads and lifts etc complete as perdirected by the Engineer-in-charge. 2 Carriageof Excavated earthfrom Work siteby mechanical; means and dumping at 5.00 km lead from work site. 3 Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per thedirection of the Engineer-in-charge. 4 P.C:C: (1:4:8) using 4 cm. size H.G. (C.B) metal including the cost of all materials, labour carriage, royalty T& P and all Taxes etc complete as per direction of EIC. 5 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of E-I-C (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by E-I-C. 6 Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength,thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compactionby using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking andLanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc complete as per direction of EIC. 7 C.C. work of M20 grade with 20 mm down graded chips (C.B.) including hoisting & laying . Last date of submission for this tender is 2024-12-04. This is a Paver Blocking tender in Khordha, Odisha