Ministry Of Micro Small And Meduim Enterprises

Ministry Of Micro Small And Meduim Enterprises has published Bids Are Invited For Hand Tools 1 Drill Chuck With Key 1.5-13Mm-1 / 2-20 Unf 02 No 2 Hammering Drill Bit Φ6 X110mm 4 Nos 3 Hammering Drill Bit Φ8 X160mm 2 Nos 4 Hammering Drill Bit Φ10 X210mm 2 Nos 5 Hammering Drill Bit Φ12 X210mm 2 Nos 6 Hammering Drill Bit Φ18 X310mm 2 Nos 7 Twist Drill Bit Φ1mm To 13Mm X120mm ( 25 Pcs ) 2 Nos 8 Ball Peen Hammer 500Gm, Head Length-105Mm 1 No 9 Flat Head Screw Driver 10Mmx12 2 Nos 10 Flat Head Screw Driver 8Mmx8 2 Nos 11 Flat Head Screw Driver 6 2 Nos 12 Star Head Screw Driver 12 2 Nos 13 Star Head Screw Driver 8 2 Nos 14 Star Head Screw Driver 6 2 Nos 15 Screw Driver Set Taparia Or Equivalant 1 No 16 Socket / Box Spanner Set Taparia Or Equivalant 1 No 17 Open Ended Spanner Set Taparia Or Equivalant 1 Set 18 Combination Plier 200Mm 2 Nos 19 Combination Plier 150Mm 2 Nos 20 Wire Stripper 150Mm, Stripping Capacity 0.3 To 4.5Mm 2 Nos 21 Nose Plier 150Mm 2 Nos 22 External Bearing Puller Steel 8 Inch 3 Legs 1 No 23 Internal Bearing Puller Steel 1 No 24 Clamp Meter Ac / Dc 3-3 / 4 Digits 41 Segment Backlit Lcd, Data & Peak Hold, Auto-Ranging, 52Mm Jaw Size, Dc / Ac Voltage, 1000A Dc / Ac Current, Frequency, Temperature, Capacitance, Resistance, Duty Cycle, Diode And Continuity Test Facility, 600V Ac / Dc Protection On All Ranges, Frequency Through Voltage And Current Measurement Possible, Auto Power Off. 1No 25 Digital Multi Meter Display : Large Lcd Display With Auto / Manual Range Count : 4000 Ac Voltage Range : 0.1Mv ~ 750V Dc Voltage : 0.1Mv ~ 1000V Ac Current Range : 0.1Ua ~ 20A Dc Current Range : 0.1Ua ~ 20A Resistance : 0.1Ohm ~ 40Mohm Capacitance : 10Pf ~ 200Uf Temperature : -40 C ~ 1000 C Frequency : 0.1Hz ~ 30Mhz 1No 26 Neon Tester Voltage Up To 500 Volt Ac 05 Nos 27 Soldering Iron 25Watt, 240 Volt, Ac 1No 28 Solder Soft 50Gm 5 Nos 29 Flux 15Gm 2 Nos 30 Allen Key Set Inch 1No 31 Allen Key Set 1.5 To 10 Mm 1No 32 Star Head Allen Key Set 1.5 To 10 Mm 1No 33 Electric Air Blower 620Watt.240Volt Ac 1No 34 Hand Hacksaw 12 1No. Last date of submission for this tender is 2023-06-21. This is a Cutting Crimping And Punching Tools tender in Kalahandi, Odisha