Indian Oil Corporation Limited

Indian Oil Corporation Limited has published Painting Of Structure Equipment Piping And Other Ancillary Parts At Various Units Of Paradip Refinery At Paradip Odisha-2 Surface Preparation 3 Sspc-Sp2 ( Ssi-St2 ) :Manual Cleaning This Applies To Manual Cleaning Of Flat Steel Surfaces Like Storage Tanks, Columns, Vessels, Exchangers, Chimneys, Steel Structures, And Other Flat Surfaces To Sspc.Sp2 ( Ssi-St-2 ) Standard Of Sweedish Specification Applying Wire Brushing, Machine Brushing / Grinding Etc. To Remove All Millscale, Residual Rust And Foreign Matter. Finally The Surface Should Be Cleaned By Dry Compressed Air Or By Clean Brush. 4 Sspc-Sp3 ( Power Tool Cleaning ) ( Ssi-St3 ) Removes All Loose Mill Scale, Loose Rust, Loose Paint, And Other Loose Detrimental Foreign Matter By Power Wire Brushing, Power Sanding, Power Grinding, Power Tool Chipping, And Power Tool Descaling. For This Jobs Agency Has To Mobiles All Required Tools I.E Copper Wire Brushes, Battery Operated Power Tool, Chiesel, Grinder Etc. Which Will Be Required For This Cleaning, No Extra Payment Will Be Mande For Tools & Tackles. 5 Applying Priming Coat With Ready Mixed Primer Of Approved Brand And Manufacturer Like Zinc Cromate Red Oxide / Mio Zinc Phosphate Red Oxide / Epoxy Primers Or Any Other Equivalent Primer At All Heights Over Steel Surfaces Like Structures, Columns, Pipes, Vessels, Tanks Etc. Including Cleaning The Surface Using Emery Papers, Consumables, Tools, Tackles, Labour Etc. Complete As Per Manufacturers Specifications And Directions Of The Engineering-In- Charge. 6 Self Priming High Build Coating Primer Like Protectomastic Self Priming High Build Coating To Achive A Minimum Dft Of 100 Microns. 7 Intermediat Coat With: Micaceous Iron Oxide ( Mio ) Type And Composition: Pigment: Mio With Epoxy Based Medium. Micaceous Iron Oxide Pigmented Paint Shall Contain A Minimum Of 50% Natural Laminar Micaceous Iron Oxide By Weight In The Dry Film. No.Of Coat : 1 Dry Film Thickness: 125 Micron / Coat 8 Supplying & Applying Various Epoxy And Other Protective Finish Paints Of Approved Make And Brand Over Steel Structures, Pipelines, Tanks And Equipments, Concrete Floors Etc. With All Materials, Labours, Tools-Tackles And Consumables Etc. Complete As Per Manufacturers Specification & Directions Of Engineer-In-Charge. 9 One Or More Coats Of Acrylic Polyurethane Paint To Achieve A Finish Coat Dft Up To 100 Micron Min. 10 Two Or More Coats Of Heat Resisting Aluminium Paint 400 Deg To 600 Deg Centigrade Such As Lustrotherm Ht 600 Of M / S. Shalimar Paints Or Intertherm 972 Of M / S. Akzo Nobel Or Equivalent Of Other Iocl Approved Manufacturer To Achieve The Dft Of 50 Microns ( 25 Microns In Each Coat ) By Brush Or Spray Application At Site 11 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade: 12 Two Or More Coats On New Work Old Surface 13 Steel Scaffloding Materials In Contractors Scope The Job Includes Transportation Of Scaffolding Materials In Contractors Scope Of Supply, Erection Of Scaffolding At Site Covering The Areas Specified Including Providing Vertical Posts Of Pipes At Inter Distance Of 1.5 M And Horizontal Numbers At A Inter Distance Of 0.5 To 0.75 M, Providing Tie Rods At Corners To Give Sufficient Strength To The Structure, Placing The Wooden / Steel Planks / Frp Gratings On Top For Making Sufficient Area. Dismantling Scaffolding After Completion Of Job And Returning The Scaffolding Material To Specified Place Including All Tools, Tackles, Consumables, Labours And Contractors Supervision As Directed By The Engineer-In-Charge 1. For Measurement In Sqm: 2 ( Length + Width ) X Height Area Covered By The Scaffolding Is To Be Taken. 2. Scaffolding Measurement To Be Done By Breaking The Height Into Parts As Per Height Slab Mentioned Below And Adopting Respective Rates Against Mentioned Height Slabs. 14 Upto 6 M 15 Above 6 M Upto 10 M 16 Above 10 M Upto 20 M 17 Intermediate Plate Form 18 Above 20 M Upto 30 M. Last date of submission for this tender is 2019-11-02. This is a Painting tender in Paradip, Odisha