West Bengal Power Development Corporation Limited

West Bengal Power Development Corporation Limited has published Procurement, Installation And Commissioning Of Coal Sample Preparation Equipment At Bankura Railway Siding, Dist- Bankura, West Bengal And Kurwa Railway Siding, Kurwa , Jharkhand.- 1 Procurement and Installation of Sample preparation equipments at Bankura Railway Siding, Dist: Bankura, West Bengal and Kurwa Railway siding, Kurwa , Jharkhand 2 Jaw Crusher (including all accessories): The machine is suitable for crushing coal. Heavy duty MS fabricated body, fitted with a pair of swing and fixed jaws. One corrugated jaw is pressed on fixed jaw by eccentrics to effect crushing. The jaws are made of high manganese steel (12-14% Mn) conforming to IS: 276 or better quality steel. The Jaw Plates are replaceable and reversible with a liner of High Chrome. The eccentric shaft is fitted with self-aligned both side sealed bearing. Feed-hopper and discharge chutes are fitted with the Crusher. Jaw size : 150 x 100 mm or higher (225 x 100 mm)Feed size: Maximum 100 mm approx. Discharge product size : -12.5 mm Capacity : 500 kg / hour or higher Motor: 5 HP (minimum), 440 volts, 3 phase, 50HzAC. Starter : DOL of L&T/BC Motor make : Crompton Greaves/Kirloskar/ABB/Siemens, Bearing Make: SKF/FAG. Sieve: Long lasting with abrasion resistant material to be used so that each sieve should last at least 6 Months. Make: M/S Eastman Crusher Company(P) LTD/ Friends Engineering Works/ Gon Engineering Works 3 Double Roll Crusher (including all accessories): Heavy duty MS fabricated body. It should comprise of a feeding hopper of approx. 3 mm thickness, holding 15 Kg approx. and feed control slides. Roller size : 12 inch & 8 inch minimum.Feed size: Maximum -12.5 mm approx. Discharge product size : -3.35 mm Capacity : 150 kg / hour or higher Motor: 3 HP (minimum),440 volts, 3 phase , 50Hz AC. Starter : DOL of L&T/BC Motor make : Crompton Greaves/Kirloskar/ABB/Siemens, Bearing make: SKF/FAG Sieve: Long lasting with abrasion resistant material to be used such that each sieve should last at least 6 Months. Make: M/S Eastman Crusher Company(P) LTD/ Friends Engineering Works/ Gon Engineering Works 4 T-type Hammer Mill (including all accessories): This Mill should be designed for grinding of coal to fixed mesh size through Standard Screen. The grinding elements should be made of High Carbon & High Chrome or better quality steel fabricated. The grinding chamber is incorporated with Standard Screen. The Screen is interchangeable and by changing the screen the product mesh size can be varied. It comes along with feed hopper, Motor operated automatic Screw Feeder, discharge chute (Completely metal body with dust proof), product delivery tube and receiver. No dust should be generated from the machine. Maximum feed size: -5.0 mm Discharge Product size (standard): 72 mesh (212 micron). Capacity : 5-6 kg per hour or higher. Motor : 3 HP (minimum), 3 phase, 50 Hz AC Starter : DOL of L&T/BC Motor make : Crompton Greaves/Kirloskar/ABB/Siemens, Bearing : SKF/FAG Sieve: Long lasting with abrasion resistant material to be used such that each sieve should last at least 6 Months. Make: M/S Eastman Crusher Company(P) LTD/ Friends Engineering Works/ Gon Engineering Works 5 PRIMARY JAW CRUSHER:Material to be crushed: Coal; Feed Size: 150 mm;Outpot Size: 50 mm;Capacity: 2 TPHMotor: 10 HP,1440 RPM, 3 Phase AC, 440 Volt,Bearing : SKF/FAGMake: M/S Eastman Crusher Company(P) LTD/ M/S Friends Engineering Works/ M/S Gon Engineering Works2. from AMF Panel to DB at AN3 Building and Interconnection in between AN3& AN4 . Last date of submission for this tender is 2025-05-30. This is a Crushers Breakers And Grinders tender in null, Multi State