Indian Army

Indian Army has published Supply Of Stores For Mta And Maint Of Aios ( Job No 6613 & 6769 ) , Rg-6 Coaxial Ptz Camera Cable Make: Plaza / Matrix / Finolex , Cat 6 Cable For Bullet Camera Make: Plaza / Digisole / D Link , Steel Roofing Trough 2400Mm Long Made Out Of 2Mm Thick @ 36Kg Each With Tolerance -2% To + 5 % , Hot Rolled Carbon Steel Sheet Confirming To Is Specification With 16 Nos 12Mm Dia Long Bolt , Machine Made ( Heavy Duty Complete Threaded With One Nut And Two Washers Of 30Mm Outer Diameter And 3Mm Thick , Per Bolt , Per Srt . The Overall Width Of Srt Shall Be 613Mm And Height Shall Be 180Mm . The Shape Of Srt Shall Be Regular And Angle Of Bending Shall Be Maintained Properly . The Srt Not Found Properly In Shape Shall Be Rejected . Make: Tata / Sail , 65 Mm Thick Bullet Resistant Glass For Loop Holes With Iron Frame Incl Necessary Arrangements Will Be Made In The Frame To Fix The Glass In The Loop Holes . The Frame Will Be Pre Painted With Two Coats Of Red Oxide Primer Of Approved Make . Frame Of Bullet Resistant Glass Will Be Made Of 1 & 5Mm Thick Ms Sheet As Per Sample Approved . The Rear Side Of Glass Will Be Covered Using 01 No Transparent Polycarbonate Sheet Of 1 . 25Mm Thickness . The Glass Should Not Have Any Perforation Or Crack Against 3 Rounds Fire Of Ak-47 / Slr Of Caliber 7 . 62 Mm From Range Of 10 M ( As Per Testing Norms ) . The Glass Will Be Of Same Specification As Approved In The Sample . , 7 . 5 Mtr Length Indian Standard Medium Beam 250Mmx125mm , Minimum Weight 37 . 30Kg Per Meter With Tolerance -2% To +5% As Per Is-808 ( Part-I ) - 1973 Predrilled With 8Mm Dia 3Nos Holes ( 01Xhole At Distance 0 . 2M From Top , 2Nd Hole At Distance 0 . 9M From 1St Hole And 3Rd Hole At Distance 0 . 9M From 2Nd Hole ) , 65X65x5mm Angle Iron Of 1 . 50M Length Welded In V Shape With 300Mmx300mmx8mm Thick Ms Plate At Top Of Ismb , And 300Mmx300mmx8mm Thick Ms Plate Redrilled With 4 Nos Holes ( 20Mm ) Welded At Bottom Of Ismb To Fixing With Fdn Bolt . 35Mmx35mmx6mm Angle Iron 1 . 0M Fixed With Nut & Bolt In Swanneck Shape At Ismb All Prefabrication Works Should Be Done As Per Drg . All Steel Surface Should Be Precoated With Two Coat Of Zinc Chromate Primer . Make: Tata / Sail . , 7Mtr Length Indian Standard Medium Beam 400Mmx140mm , Minimum Weight 61 . 60Kg Per Meter With Tolerance -2% To +5% As Per Is-808 ( Part-I ) - 1973 Predrilled With 8Mm Dia 3 Nos Holes ( 01Xhole At Distance 0 . 2M From Top , 2Nd Hole ) , 65X65x5mm Angle Iron Of 1 . 50M Length Welded In V Shape With 300Mmx300mmx8mm Thick Ms Plate Redrilled With 4 Nos Holes ( 20Mm ) Welded At Bottom Of Ismb To Fixing With Foundation Bolt . 35Mmx35mmx6mm Angle Iron 1 . 0M Fixed With Nut & Bolt In Swaneck Shape At Ismb All Prefabrication Works Should Be Done As Per Drg . All Steel Surface Should Be Done As Per Drg . All Steel Surface Should Be Precoated With Two Coat Of Zinc Chromate Primer . Make Tata / Sail. Last date of submission for this tender is 2021-02-02. This is a Bolts tender in 55 Engineer Regiment C/o 56 Apo, Multi State