Military Engineer Services

Military Engineer Services has published Tender For Provision Of Amf Panel And Allied Works Services At 400 Kva Dg Sets At Af Stn Singarsi Under Age I Af Singarsi; 1 Supply, fixing and commissioning of AMF panel of size 1.5m x 1.5mx 0.6m, made out of CRCA sheet 2.0 mm thick indoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickeringof switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 600 A capacity complete with powder coating, necessary internal electric connection as required and provision of the following:-(i) MCCB 630A, 4P, 36kA, Thermal and magnetic Release-02 Nos(ii) Power Contractor 600A, 4P-02 Nos, (iii) MCB 32 Amp, DP, 10 KA-01 Nos(iv) MCB 10-20 Amp, SP, 10 KA-09 Nos (v) SMPS BATTERY CHARGER 24V-01 Nos (vi) AMF RELAY EC-2 MODEL-01 Nos (vii) AUTO MANUAL SELCTOR SWITCH-01 Nos (viii) PLA RELAY-04 Nos(ix) ON-OFF PUSH BUTTON (R + G)-03 Nos (x) ON-OFF LAMP (R + G) (1 + 1)-03 Nos (xi) EMERGENCY STOP PUSH BUTTON RED-01 Nos (xii) HOOTER-01 Nos (xiii) DIGITAL Amp + Volt METER WITH INBUILT SELECTOR SWITCH-01 Set (xiv) MCB SP 6 Amps, 10 KA for PROTECTION-03 Nos (xv) LED INDICATING LAMP R. Y. B.-03 Nos (xvi) C. T. RATIO 600 / 15VA-03 Nos 2 LT Panel Board of size 1.8mx 1.8x 0.6, made out of CRCA sheet 2.00 mm thick indoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickeringof Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 1000 A capacity complete with powder coating, necessary internal electric connection as required supported on iron angle of 100 x 60 mm and provision of the following:-INCOMIMG: a) MCCB 630A, 50 kA, AC 3 Phase , 4Pole, 415 V, 50Hz,adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2,including rotary handle, spreader links etc(ICS=ICU 75%) Make: Havells (Cat part No: IHLLNFB40630) or equivalent make of L&T/ABB- 02No. OUTGOING: a) Euroload change over switch 630A, 4 pole without SS enclosure including phase barrier, handle with door interlock, , confirming to IS/IEC: 60947-3 complete. Make: Havells (Cat Part No: IHCNFO0630) or equivalent make of L&T/ABB- 01No. b) Metering module analogue type including voltmeter, ammeter, selector switch etc with all connected CTsetc-01 Set c) LED Indicating Lamps for each phase with colour coed Red Yellow Blue for R, Y and B Phases for each breakers. . Last date of submission for this tender is 2024-12-07. This is a Switch Gear tender in Shillong, Meghalaya