Water Resources Department

Water Resources Department has published Mechanical Components For Rehabilitation Of Jayakwadi Project In Tq. Paithan Dist Aurangabad Of Maharashtra ( Under Drip-Ii ) -2 Dam Work Jayakwadi ProjectRepairs 3 Replacement of bend and twisted tie channels- 4 Nos 4 Restoring alignment of gear train no 2 ,3,7 and 9 for gate no.4 5 Repairs to Goliath Crane at spillway with painting by synthetic enamel paint@ Jayakwadi Project 6 Restoration of Component of Stoplog girder resting arrangement 7 Fabrication of Stoplog gate assembly complete -1 No of size 12.192X1.0 Mtr with Skin plate, Web plate, Flange plates, Stiffeners, Roller assys-4 Nos etcfor Jayakwadi Project 8 Fabricationand Erection stop log repairplatformof size17.5 X 2.7 Mtr at Jayakwadi Project 9 Repairsand maintenance of Goliath Crane @ Chanakwadi barrage 10 Manufacturing, and Erection of hoist protection cabin and extended platformat LBC and RBCat Jayakwadi Project 11 Providing ,Erecting, Testing and Commissioning ofForward Reverse starter upto 20HP Gate motor(InductionMotor ) 12 Providing ,Erecting, Testing and Commissioning ofInductionMotor for Gate upto capacity 15 HP 13 Supply and erecting mains with 2 x 2.5 sq.mm FR copper PVC insulated wire Laidin provided conduit/ trucking/ inside pole/ bus bar or any other places as per specification no WG-MA/BW 14 Supplying and erecting mains with 3 x 10sq.mm FR copper PVC insulated wire Laidin provided conduit/ trucking/ inside pole/ bus bar or any other places as per specification no WG-MA/BW 15 Supplying and erecting triple pole metal clad HRC fuse switch 415 V ,63 A with neutral link with HRC fuses on angle iron /GIframe as per specification SW-SWR/TPHRC 16 Supplying erecting and marking TPN MCB 40A to 63A,C series in provided distribution board as per specification no SW-SWR/MCB 17 Supplying and erecting CRCAsheet metal one way enclosures suitable for DPMCB/ TPMCB / FB MCB erected on angle iron GI frame 18 Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for Fabrication of boxes panel boards etc Including Cutting, Bending drilling, welding ,riveting etc and paintingwith one coat of red lead paint and 2 coats of enamel paints 19 Supplying and erecting iron ,sheet metal work consisting of CRCAsheets ,various section of iron ,plates, checker plates, rods, bars ,MS pipes etc for panel board or any other purpose with bending ,cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two quotes of enamel paints to match the switch gears or as per direction by the authority 20 Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500 V, 0 to 1000AAC supply with necessary PVC wire leads and lugsand mounting hardware on provided panel complete with calibration certificate from manufacturer 21 Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, calibratedfor 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugsand mounting hardware on provided panel complete with calibration certificate from manufacturer 22 Supplying and erecting selector switch suitable for voltmeter /ammeter for three phase AC supply 500V,50 Hz ,on provided box, panel and duly connecting with necessary PVC wire leads and Lugs. 23 Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5ratio with 15 VAburden erected in provided CRCA box duly secured with insulating material connected to the meter with test certificate 24 Supplying and erecting 525 V3 phase, 50 Hz ,APP type capacitor having minimum over current capacity of 1.8In, peak in rush current capacity 300I n and minimum life 150000 hour kVAr Bank of all poly propylene condenser (APP)with the standard capacities of 2,3 ,5,7 ,10 ,12.5 and 15 kVA runits of P.F correction for operation on 3 phase 50Hz with externally discharging resistance ,earthingterminals and build on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. 25 Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps 230 V /250V erected on provided CRCA Box with panel type fuses and connected with PVC wires 26 Supplying erecting and terminating XLPE armoredcable 3 core 25 sqmm aluminum conductor with continuous 5.48 sq mm GI Earth wire complete erected with glands and Lugs, on wall /trusses/ pole or laid in provided trench/ pipe as per specification no CB-LT/AL 27 Supplyingand erecting crimping type aluminum Lugs for cable 25 sq.mm complete as per specification no CB-CL/AL . Last date of submission for this tender is 2023-10-04. This is a Rivets tender in Paithan, Maharashtra