Tata Institute Of Fundamental Research

Tata Institute Of Fundamental Research has published Sitc Of Laboratory Fume Hood Supply Installation And Commissioning Of Laboratory Fume Hood And Exhaust Systems , Fumehood And Accessories : , Pp Cupsink 3X6x4 , Fumehood Microprocessor Based Airflow Monitor And Alarm -Vertical - C/W Sm7 Sensor, Suitable Power Adaptor , Rear Scribe-18Hx00dx5l, H=Height Up To False Ceiling , Rear Scribe-35Hx00dx18l , Rear Scribe - 57Hx00dx05l , Base Molding 4 Ft. , Fumehood Electrical System-2+2 Nos 6/16A Sockets With Switch, 1 No 4Ft Non-Flame Proof Light Fixture Along With Led & 15 Intensity With 3 Color Settings Control Switch, 1 No Fumehood Db And Internal Wiring Within The Hood , Fumehood Front Control Valve For Compressed Air , Fumehood Front Control Valve For Nitrogen , Front Control Valve For Raw Water , Fumehood Front Control Valve For Vacuum , Fumehood Ss304 Internal Tubing Until 150Mm Above The Hood With Capped End (1/2 For Rw, Va, 1/2 With Insulation Cwi, Cwo, 1/4 For N2, Ca) , Base Unit Fh Solvent 2 Door-35Hx22dx36l , Base Unit Fh Acid 2 Door-35Hx22dx36l , Floor Standing Worktop Support Of Size:36Hx08l , 6 Feet Benchtop Hood, Combination Sash, Sash Opening 28, 30 Internal Depth, 72 Length, Phenolic Resin Liner, With Insert Type Worktop , 6 Ft Fumehood Ceiling Enclosure With Access Door, Size:18H X 30D X 72L, Cf=For Combination Sash Hood, H=Height Up To False Ceiling , Epoxy Lattice Assmbly For 6’ Benchtop Fumehood , 6 Feet Bench Top Fumehood Insert Type Granite Worktop. , Centrifugal Blowers And Motor:- Medium Pressure Direct Driven Pp Centrifugal Blower Cmveco315/280 (1600-2600Cfm @ 30-140Mm Static), With Clamp Adapter, Electro Galvanized Stand Base Frame And Fasteners. Refer Cluster Details. , G1 M8x50 Bolts With Nuts & Washer (Motor And Blower Pedestal) , Vibration Isolators For Cmmv-315/280 , M10x100 Pin Type Anchor Fasteners , Motor 3.7Kw/2P(5Hp/2P) Tefc B5/Flange Mounted 3Phase 50Hz, Ie2.Terminal Box Should Be On Top Side. Motor Shall Be Compatible For Vfd Operation. Refer Cluster Details. , Pp Weather Cowl Dia 350 Mm. (1.48 Sqm). , Ms Stack Support For Cmveco-315/280 Model, (Kg: - 90 Kgs ). , Motor Guard With Accessories For 5Hp, Refer Motor Capacity. , 25X25x14g Thk Pp Bird Mesh For Dia 250 Mm Bypass End Connection, Refer Drawing. , Dia 315 Mm And 3Mm Thickness Pvc Transparent Flexible Connection For Inlet & Outlet Of The Blower, Refer Cluster Details. , Pp-Frp Ducting And Accessories - Pp-Frp Ducting Using 3Mm Thick Ppgl Sheets 3 Mm Thick Frp Lining Using Isothelic Resin Including Flanges & Bends, Gasket, Support With Threaded Rod, Clamps, Anchor Fasteners, Washer Nuts And Bolts And Uv Resistant Painting. , Ms Support For Ducts Like Threded Rod,Anchor Bolts,C-Chanels, Clamps,Angles,Bolts & Nuts. Inside Lab, Within Shaft & Outside The Building. , Pp Moulded 300Mm Dia. Single Leaf Butterfly Manual Damper With Both Side Flanges.Refer Drawing. , Pp Moulded 250Mm Dia. Single Leaf Butterfly Manual Damper With Both Side Flanges.Refer Drawing. , Fumehood Base Cabinet Vent Connection & Accessories , 40 Mm Pp Slip X Slip X Slip Tee , 40Mm Cts Slip X Mpt Male Adapter 2 With Chuck Nut , 40Mm Cts 90-Degree Slip X Slip Elbow , 40Mm. X 3000Mm Pp Exhaust Pipe. Last date of submission for this tender is 2025-03-13. This is a Laboratory Enclosures and Accessories tender in mumbai, Maharashtra