Rural Development Department

Rural Development Department has published Procurement Of Im 2 Is 15500 Hp Accessories And Tools Procurement Of Im2is 15500 Hp Accessories And Tools , Reducer Cap For Cylinder Of Deep Well Hand Pump Is 9301/1990 , Cylinder Body With Brass Liner For Deep Well Hand Pumps ( Is 9301/1990 ) , Upper Valve For Deep Well Hand Pumps ( Is 9301/1990 ) , Check Valve For Deep Well Hand Pumps ( Is 9301/1990 ) , Check Valve Seat For Deep Well Hand Pumps ( Is 9301/1990 ) , Specer For Deep Well Hand Pumps ( Is 9301/1990)And Deep Well Hand Pumps (Vlom) ( Is 130561/1991 ) , Rubber Seat Retainer For Deep Well Hand Pumps ( Is 9301/1990 ) , Front Cover For Deep Well Hand Pumps ( Is 9301/1990 )And Deep Well Hand Pumps ( Vlom )( Is 130561/1991 ) , Head For Deep Well Hand Pumps ( Is 9301/1990 ) And Deep Well Hand Pumps ( Vlom ) ( Is 130561/1991 ) , Third Plate For Deep Well Hand Pumps ( Is 9301/1990 )And Deep Well Hand Pumps ( Vlom )(Is 130561/1991 ) , Chain With Coupling For Deep Well Hand Pumps Is 9301/1990 ) , Handle For Deep Well Hand Pumps ( Is 9301/1990 ) , Connecting Rods For Deep Well Hand Pumps ( Is 9301/1990 ) , Water Tank For Deep Well Hand Pumps ( Is 9301/1990 ) , Pump Bucket For Deep Well Hand Pumps ( Is 9301/1990 ) , Rubber Seating ( Upper Valve ) For Deep Well Hand Pump ( Is 9301/1990 ) , Rubber Seating ( Lower Valve ) For Deep Well Hand Pumps ( Is 9301/1990 ) , Sealing Ring For Deep Well Hand Pumps ( Is 9301/1990 ) , ‘O’ Ring For Deep Well Hand Pumps ( Is 9301/1990 ) , Handle Axle For Deep Well Hand Pumps ( Is 9301/1990 ) , Cylinder Assly Comp. Unit ( Inclusive Of Stainless Steel Plunger Rod 12 Mm Dia. With Nitrite Rubber, Pump Bucket ) Suitable For Deep Well Hand Pumps –Ii , Single Side Shielded Bearing Confirming To Is 6455/1972 Suitable For Deep Well Hand Pumps ( Skf Make ) , Hex. Bolt M 12X20 As Per Is 1363/1984 , Hex. Bolt M 12X40 As Per Is 1363/1984 , Hex. M 12 Nut , Chain High Tensile Bolt M 10X 1.5 X 40 Is 1365 Bolt , Chain High Tensile Nutm-10 , Brass Liner As Pev. Is 4071/1981 Suitable For Deep Well Hand Pumps Im – Ii (Brass Liner) , Upper Valve Assly With 2 Nos. Nit Rubber Pump Buckets And Comprising Of Pulnger Yoke Body, Upper Valve Rubber Seating Spacer Follower Suitable For Deep Well Hand Pumps Im – Ii , Lower Valve Assly Comp Suitable For Deep Well Hand Pumpsim – Ii , Leather Pump Bucket Washer For Im Ii Suitablefor Deep Well Hand Pumps Original “ Shakti Make” , Rod Coupeling For Suitable Deep Well Hand Pumps , 32 Mm G.I. Pipe Coupling , Handpump Body Complete –Im 2 , 32 Mm X3 Mtr Length Hot Dip Galvanized Screwed And Socked Pipe. One End Of The Riser Pipe Should Be Fitted With Hot Dip Galvanized Coupler And Other End With Thread Protector. Pipe Supply Should Haveis1239 Markembosed On It , Manufacture Supply And Delivery Of Bis Marked Fully Hot Galvanized Deep Well Hand Pump ( India Mark-Ii)Assembly Complete Unit With 12 Nos. Of Connecting Rods ( Bright Bar ) Of 12 Mm Dia. 3 Mtrs. Length Each Confirming To Is 15500 With Is Amends / Revisions Up To Date And 12 Nos (36 Mtrs) 32 Mm X3 Mtr Length Hot Dip Galvanized Screwed And Socked Pipe. One End Of The Riser Pipe Should Be Fitted With Hot Dip Galvanized Coupler And Other End With Thread Protector. Pipe Supply Should Haveis1239 Markembosed On It Including Bis Packing Loading, Unloading And Stacki9ng Charges To The Zilla Parishad Gsda Stores May Any Where In Maharashtra State. The Component Identification And Manufactures Identification Mark Shall Be As Per Bis Specifications With Telexcopic Stand Assembly In Live Of Normal Stand For 150 M.M Dia Bore Wells.. Last date of submission for this tender is 2022-02-02. This is a Hosiery tender in Akola, Maharashtra