Rural Development Department

Rural Development Department has published Tender For Annual Rate Contract For Supply Of Handpump At Its Spares At Zilla Parishad Chandrapur - Handpump and its spares 2 32mm Nominal bore hot dipped galvanised screwed and seiected pipe in 3.00 mt length with tolerance of + 0 to (-) 25mm. Confirming to IS 1239 (Part I) 1990 Meddium Class The socket shall be manufactured from seamless pipe or machined from solid bar Confirming to grade Fe 410 - S of IS 226/1975 with a dimensions (length & Diameter) specified in IS 1239 (partll) 1982 and shall be hot dipped galvanised. One end of the riser pipe shall be fitted with hot dipped galvanised coupler and the other with thread protector. pipe supplied shoud have IS 1239 mark embossed on it. tolerance on thickness and mass galvanising, leak lightness test, bend test on tubes, chemical composition, dimensions, bend test, sampling criteria for conformity marking, protecting and packing and all other details should be followed as per IS:1239 (Note : 3 mt length of pipe willl be measured without socket) Wt per pipe should not be less than 8.5 kg per piece. 3 Upper valve for deep well IM II hand pump as per IS 15500(Part II) /2004. 4 Check valvefor deep well IM II hand pump as per IS 15500(Part II) /2004 5 Water tankfor deep well IM II hand pump as per IS 15500(Part II) /2004 6 Telescopic Stand for deep well IM II hand pump as per IS 15500(Part II) /2004 7 Sealing ring for deep well IM II hand pump as per 15500(Part II) /2004 8 cylinder assembly (complete unit inclusive of stainless steelplunger rod 12 mm dia with NITRILE rubber pump bucket)with upper valve assembly, lower valve assembly suitable for IM II hand pump as per IS15500 (part II) /2004 9 uppervalve assembly with (2nos nitrile rubber) pump bucket ,& comprising of plunger yoke body, upper valve, rubber seating, spacer & follower suitable for IM II hand pump as per IS 15500 (part II) 2004 10 Lower valve assembly with rubber seat retainer, rubber seating, check valve & check valve seat for deep well hand pump IM II as per IS 15500 (part II) 2004 11 Pump bucket ( nitrile rubber) for deep well hand pump IM II / III as per IS 15500 (part II) 2004 12 Hex bolt M 12 x 40 with nut M 12 as per IS1363/1984 13 Front cover for DW IM IIHP as per IS 15500(Part II) /2004 14 Head for DW IM IIHP as per IS 15500(Part II) /2004 15 Third plate for DW IM IIHP as per IS 15500(Part II) /2004 16 Chain with coupling for DW IM II HP as per IS 15500(Part II) /2004 17 Handle for DW IM II HP as per IS 15500(Part II) /2004 18 Connecting rod12 mm dia & 3 mtr forDW IM II HP as per IS 15500 ( part II) /2004 19 Rubber seating for upper valve forDW IM II HP as per IS 15500(Part II) /2004 20 Rubber seating for lower valve for DW IM II HP as per IS 15500(Part II) /2004 21 Handle axle (stainless steel) with washer and nut fordeep well IM II hand pump as per IS 15500(Part II) /2004 22 Reducer cap for cylinder of DW IM II HP as per IS 15500(Part II) /2004 23 Socket 32 mm for riser pipe for DW IM II HP as per IS 1239(Part II) /1992 24 Rod socket 12mm for connecting rod forDW IM II HP as per IS 15500(Part II) /2004 25 Cylinder body with brass liner deep well IM II hand pump as per IS 15500(Part II) /2004 26 Plunger rod for deep wellhand pump IS 9301/1990 27 Chain high tensile bolt M 10 x 15 x 40 with nyloc nut IS1365(Part II) 28 Hex-M 12 nut 29 Button die with holder m12 x 1-75 as as per IS 15500 (part II) 2004 30 Heavy duty pipe wrench 600 mm (Taparia make) 31 Heavy duty pipe wrench 450 mm (Taparia make) 32 Connecting rod combination vice T-IM II-08 33 Hack saw frame (300 mm) 34 Heavy duty32mm NB pipe Vice as per IS 15500 (part II) 2004 35 Heavy duty lifter spanner for 32 mm pipe as per IS 15500 (part II) 2004 36 Crank spanner 17 x 19 as per IS 15500 (part II) 2004 37 Bearing (No.6204zz- Prepacked with lithium base grease and seated on both sides) SKF make 38 Handle spacer 39 Bolt for front cover m 12 x 1.75 x 20 mm long 40 ISI Marked deep well hand pump IM-II complete with accessories and with 12 nos. of connecting rod made of bright bar electro galvanized, fitted with coupler with telescoic stand assembly, Pump Head assembly, cylinder etc. recommended for use in borewells having 150 mm casing pipe as per BIS9301-1990) along with ISI G. I. pipe with one side coupler (Pls refer GI pipe specification given below) - 12nos complete H. P. Set) 41 Heavy duty pipe wrench 12 inch (Taparia make) 42 Water tank extension 1.5 feet heigst 43 Brass sleeve heavy class - isi Standared 44 Connecting rod lifter 45 Cutting plier pakkad (Taparia make) 46 Button die with holder for 32 mmG. I. pipe as as per IS 15500 (part II) 2004 47 Ball pan hammar with handle (1 kg Approx) 48 Heavy duty pipe wrench 900 mm (Taparia make) . Last date of submission for this tender is 2025-02-21. This is a Hand Pump tender in Chandrapur, Maharashtra