Rashtriya Chemicals And Fertilizers Limited

Rashtriya Chemicals And Fertilizers Limited has published Notice Inviting Tender For Supply Of Return Bend , Return Bend , Size-4 Nb X Sch 80 , 180 Degree , Short Radius , Seamless 1 . Moc: Astm A403 Wp321h; 2 . Dimensions: As Per Asme B16 . 28 . 3 . End Finish: Bevelled Conforming To Ansi B16 . 25 . 4 . Return Bends Shall Be Free From Surface Imperfections . 5 . Return Bends Shall Be Pickled Free From Scale . 6 . All 321H Grade Return Bends Shall Be Solution Annealed At A Minimum Temperature As Per Astm A 403 . The Grain Size Range Shall Be As Per Astm E112 No . 7 To No . 4 . 7 . The Wall Thickness At All Points Shall Be At Least 87 . 5% Of The Specified Nominal Wall Thickness . Thickness Testing Shall Be Witnessed By Tpi Inspector . 8 . All 321H Grade Return Bends Shall Be Given A Stabilization Heat Treatment Subsequent To The Solution Anneal . 9 . Vendor Shall Carry Out Dp Test Of Complete Outer Surface Of 100% Return Bends Which Shall Be Witnessed By Tpi Inspector . Notes: 1 . Vendor Shall Engage One Of The Tpi Agency From Lris/Tuv/Bv/Irs For Final Inspection . 2 . Each Return Bend Shall Be Supplied With Proper Third Party Stamping . 3 . Qap Shall Be Submitted For Rcf Approval After Po Placement < ( >&< ) > Before Starting The Actual Manufacturing Process . 4 . All The Test Certificates Shall Be Endorsed By Tpi Inspector . 5 . Vendor To Furnish All Relevant Documents / Inspection Records In Original Which Shall Comprise Of Test Certificates For Chemical Composition And Physical Properties Of Material , Metallography For Grain Size , Heat Treatment Records , Tpi Inspection And Final Release Note . 6 . At A Minimum , All Items Shall Bear Legible Marking Giving Name Or Brand Of Manufacturer , The Grade Of Material From Which The Item Has Been Made , Specification Number , Heat Number < ( >&< ) > Heat Treatment Lot Identification . For Austenitic Materials , The Marking Ink Or Paint Shall Not Contain Any Harmful Metal Or Metal Salts Such As Zinc , Lead Or Copper Which Cause Corrosive Action On Heating . , Tpi Charges: All Arrangement For Tpi Inspection & Visit Shall Be Done By Vendor . Vendor Shall Engage One Of The Tpi Agency From Lris/Tuv/Bv/Irs For Final Inspection . . Last date of submission for this tender is 2020-03-13. This is a Pipe And Tube Fittings tender in Rcf Ltd Mumbai, Maharashtra