Pune Municipal Corporation

Pune Municipal Corporation has published Tender For To carry out various development works at S.No.113, Parvati, Sinhagad Road, Veer Baji Pasalkar Memorial. -ITEM NO: 1 Making of Realistic High Relief Mural work PROCEDURE TO BE FOLLOWED WHILE MAKING MURALS: Concept drawing is made according to the subject desire. 2) Approved concept drawing is then made into the actual clay work 3) The clay work is then molded using POP as a waste mold (This process is followed once the clay work is approved and finished) This POP mold is then removed where we get the negative side of the art work. 4)This POP mold is then cleaned and the process of FRP casting (Where in this case we are using ISO Thallic Polyester Resin) a high-grade resin all weather proof and have a good life. This is a 2-layer process (Considered thickness of the FRP work) 5mm to 6mm, Fiber matt is use as the inner surface for strength and the outer surface (Which is seen to us) is the first coat of this Resin. 5) The POP waste mold is then broken and the FRP casted product is removed from the mold, till this step we get our FRP casted art work. 6) This Casted Art work then then washed and assembled to each other (If we have piece molding) where different piece is made separately for molding and then casted separately later, they are assembled together. 7)Once the assembling of the entire FRP model Fabrication reinforcement if inserted for structural support. 8) This FRP art work then finished and a plain coat of primer color is given. 9)Further the art work is ready for Painting in the desire Realistic color scheme in PU paint and fixing of mural will be done on specified location. The above process is followed by a government approval method from the DOA of Maharashtra where the clay model is passed by the authority of DOA; a visit is done to the studio for the passing for the Clay model of the desire size. Once the statue (Clay work) is passed then the Clay work is molded and casted in FRP. (SSR Item No: 1.01) (PMC NON-DSR) Unique No (02032304) Rate List Year (2022-2023) ITEM NO: 2 Providing, aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg-hade on top face and polymer (service) coating of bottom face specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/Square Metre) as (SSR Item No: 51.100) (PMC Bhavan) Unique No (16244) Rate List Year (2024-2025) ITEM NO: 3 Name board inside / outside Providing and fixing the Name board inside / outside of the School and Auditorium including providing and fixing stainless steel letters of 18 Guage thick. Height 30 inch and 1.5 inch thick Side patti including Polyurathene, Duco paint finish etc. Complete. (SSR Item No: 64.16) (PMC Bhavan) Unique No (16725) Rate List Year (2024-2025) ITEM NO: 4 Engraving of 50mm Height Engraving of 50mm Height Alphabets on Granite Plate including Colouring as instructed by engineer in charge (SSR Item No: 64.8) (PMC Bhavan) Unique No (16717) Rate List Year (2024-2025) ITEM NO: 5 Engraving of 40mm Height Engraving of 50mm Height Alphabets on Granite Plate including Colouring as instructed by engineer in charge (SSR Item No: 64.9) (PMC Bhavan) Unique No (16718) Rate List Year (2024-2025) ITEM NO: 6 Engraving of 10 to 25 mm Height: Engraving of 10 to 25 mm Height Alphabets on Granite Plate including Colouring as instructed by engineer in charge (SSR Item No: 64.10) (PMC Bhavan) Unique No (16719) Rate List Year (2024-2025) ITEM NO: 7 Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete (SSR Item No: 44.12) (PMC Bhavan) Unique No (15996) Rate List Year (2024-2025) ITEM NO: 8 Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. (SSR Item No: 21.33) (PMC Bhavan) Unique No (15229) Rate List Year (2024-2025) ITEM NO: 9 Providing an applying high quality artistic wall painting includes graffiti, landscape, colour patterns and Mural paint. painting from qualified GD art/ BFA artist Work on any type of surface at any height using scaffolding as per the instruction of site incharge. Measurement will be actual maximum size of art.Including waterproof Asian apex color and PU lacquer coating. (SSR Item No: 63.19) (PMC Bhavan) Unique No (16708) Rate List Year (2024-2025) ITEM NO: 10 Basalt stone Paving in lime Mortar Providing and Laying Newasa Stone for paving and thread risers in cement mortar of 150 mm thick (Two line dressed stone 0.45x0.30x0.125 to 0.15 and not less than 0.30x0.30x0.15 Mtrs cut in shape and two adjacent sides to be dressed, from Newasa, Dist Ahmednagar) in plain/diamond pattern on a bed of 1:4 C.M. over 150mm thick lime concrete, and filling the gap in 1:2 Mortar etc, complete) STONE DRESSING IN TICHIV STYLE (SSR Item No: 67.20) (PMC Bhavan) Unique No (16934) Rate List Year (2024-2025). Last date of submission for this tender is 2025-11-20. This is a Road Work tender in Pune, Maharashtra