Military Engineer Services

Military Engineer Services has published Tender For Certain Sanctioned Works Under Icgs And Icgas Ratnagiri; 1 Supply only HDPE material, UV stabilized barricade of minimum Size1473mm (Length) X 940mm (Height) X 276mm (Breadth) having weight of the barricade should not be less than 9 kgand Water ballast capacity should be more than 80 Litres complete all as directed by Engineer In Charge. 2 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/disintegrated rock complete all as specified and as directed. 3 Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones etc. not exceeding 10 square metres on plan and not exceeding 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and as directed. 4 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed. 5 Removing excavated material exceeding 250 metre but not exceeding 500 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and as directed. 6 Material & Labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate Cement concrete as in foundations, filling and mass-concrete complete all as specified and as directed. 7 Material and Labour for machine cut laterite stone masonry wall exceeding 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:4 complete all as specified and as directed 8 Material and Labour for broken stone or boulders Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. 9 Material and Labour for 100mm thick PCC 1:4:8 type D2 using 40mm aggregate as in base complete all as specified and as directed 10 Material and Labour for 100mm thick PCC 1:2:4 type B1 using 20mm aggregate as in sub base, base, wearing course complete all as specified and as directed 11 Material and Labour for rendering 10mm thick in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed 12 Material and Labour for Chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick as available with local manufacturers with mixture of white, grey cement in equal proportions set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in Cement Mortar 1:4 with texture, colour and design patterns complete all as specified and as directed 13 Supply and Fixing of premium bathroom wall mounted mirror cabinet cum storage organiser (Made of Stainless steel Grade 304 Mirror Cabinet) with overlay mirror design of size 450 to 500 mm in height, 300 to 350mm in width and 100 to 130 mm in thickness as available in market and supplied by manufacturer made from the best quality of stainless steel supports with additional nickel-chrome coating layers to give it a glossy finish as well as having rust-proof, scratches-resistance and corrosion proof, Stainless Steel material on outer side, The cabinet having convenient magnetic door, high-quality hinges for smooth opening and closing, four compartments of internal shelving with full-overlay mirror design, pre drilled holes for easy installations including with all necessary fittings for wall mounting it on bathroom etc., complete all as specified and as directed 14 Supply and Fixing of Toughened glass shelf assembly of size 200mm x 200mm x 300mm for corners of bathroom of shape quarter circle including SS railings on top fixed to the wall with brackets complete all as specified and as directed. 15 Material and Labour formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and as directed. 16 Material and Labour for TMT bars of grade Fe 500/Fe 550 D having 10mm Dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm Dia or securing with clips complete all as specified and as directed. 17 Material and Labour for TMT bars of grade Fe 500/Fe 550 D having 5mm Dia and over up to and including 10mm Dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm Dia or securing with clips complete all as specified and as directed. 18 Material and Labour for RCC type B1 1:2:4 using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams: bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed 19 Supply and Fixing of Gl pipes 65mm Dia heavy duty to be used for cattle trap including necessary fitting and fixing to the metal frames intact etc. complete all as specified and as directed by Engineer In charge. 20 Supply and Fixing of Framed work as in doors or gates of angle or other section withgusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, cattle traps etc. of grade Fe 410-W(Grade E-250 Quality A) to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. 21 Material and Labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and as directed . Last date of submission for this tender is 2025-12-04. This is a Barricades tender in Ratnagiri, Maharashtra