Maharashtra Industrial Development Corporation

Maharashtra Industrial Development Corporation has published Centralized Water Scheme At Waluj . Replacement Of Damaged Patches Of Existing Old 1050 Mm Diameter M.S. Pipeline By New 1050 Mm Diameter M.S. Pipeline Patches.- 1 Lift 0 to 1.5 M 2 Lift 0 to 1.5 M 3 Add for every additional lift beyond initial lift of 1.5 M for Item Nos. 5 to 10 4 Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) 5 2) In PCC M-150 6 In RCC M-200 7 2) In RCC M-200 8 Corrosion Resistant Steel (Fe 500) 9 6) 10.00mm. 10 6) vi) 10.00mm. 11 ii)) Above 1000 mm. Upto1250 mm. dia. 12 i)) Upto 250 mm. dia. 13 7) 200 mm. 14 19) 1000 mm. 15 5. C. I. ARV FLFF PN 1.6 200mm Dia. 16 10) 1000 mm 17 Providing and applying 3 layer polyethylene coating of minimum 3000 micron composite coating and internal fusion bonded epoxy lining as per IS 3589 anex C of 400 micron thickness for underground laying M.S. pipes, Similarly dual layer polyester coating of 400 micron externally and internal fusion bonded lining as per IS 3531 for above ground laying M.S pipe. Rates shall include cost of material coating and wrapping over the pipes, handling charges , preparation of pipe surface all labour, material, including transportation of pipes from site of works to factory and back to site of works after coating etc complete. (The rate is for inside plus outside area both included.) Note- Pipe coating shall be done at factory 18 Internal Lining (food grade Epoxy) Providing and applying two part food grade polyamide cured solvent less epoxy lining, meeting BIS 16676on the internal surface of MS Pipe afterblast cleaning to SA 2½ with Anchor Profile of >75 Microns Using angular Steel Grit.The minimum dry film thickness (DFT) of internal lining shall be 400 micron (SSPC PA2). The epoxy coating should offer highest resistance to cathodic disbondment and provide excellent adhesion to steel. The manufacturer shall have the certificate issued in support of portable water service for tests of pH, turbidity, total hardness, chloride nitrate, iron, arsenic & fluoride as per IS 10500 : 2003 and IS 16676 : 2017. Site application shall not be permitted.The rates are including loading, unloading, handling and transportation of Pipe etc complete. Note: Product shall be supplied and applied as per detailed specification provided by the department. 19 10 mm. . Last date of submission for this tender is 2025-05-29. This is a Pipe Laying tender in Aurangabad, Maharashtra