Maharashtra Industrial Development Corporation

Maharashtra Industrial Development Corporation has published Tender For Addl. Nashik( Ambad) Industrial area.... Survey and demarcation of Gat No. 43 & Gat. No 72 at Ambad Industrial area - Conducting topografical ground / land survey in the specified areas as shown in the tender drawings by carry out polygon Drone survey agencies. It will use fully autonomous professional survey grade drone and in post process for aerial triangulation required ground control points and benchmarks will be collected by using survey grade dual frequency DGPS-PPK system. After post processing agency will deliver following final output. 1.Geotagged images in JPG format with resolution of 4-5cm/pixel with 70% overlap 2. GCP values in .CSV format. 3. 3D point cloud cover in .las format. 4. digital surface model (DSM) in .tiff format. 5. 2D orthorectified images in .tiff format with 5 cm resolution which gives capability to capture detailed features. In addition to that Scanning, Digitisation and Geo-referencing of cadastral /revenue maps and interpretation of all existing features like building, water bodies, rivers, agricultural field etc to generate base map. Creation of GIS platform by using orthorectified image and revenue data by Linking of textual data(7/12) which special data( Vector digitised maps). All will helps to analyse and identify all affected properties. 3 Fixing survey pegs in earth and all sorts Soil, Sand, Gravel, Soft Murum, etc. including conveying, fixing etc. complete. 4 Providing and fixing stream lined M-20 grade RCC guard stone including mild steel bar reinforcement etc. complete. 5 Supply of unskilled helper for survey & demarcation. 6 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 7 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 8 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. 9 Providing and erecting Overhead signs made out of 4 mm aluminum composite panel with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012, with designed back support frame of mild steel angle with vertical and lateral clearance given in clause 801 and 802, duly painted on back side with two coats of grey stove enamel paint and installed as per clause 802.6 over a designed support system of structural steel work trestles and trusses of sections and type as per structural design requirements and approved plans including painting with one coat of epoxy primer and two coats of epoxy finish paint.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier.This item does not include the cost of structural steel work required for support system. 10 Charges towards obtaining different types of maps from various department such as village maps,taluka road maps, District roads maps, and fees to be paid to tahsil office, irrigation office, PWD office etc. 11 BASIC TEST OF CEMENT: Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. 12 BASIC TEST OF AGGREGATE: Water Absorption, Specific Gravity,Impact Value, Crushing Value. 13 HOLLOW / SOLID /AAC BLOCKS: Density Test . (Set of 3 Blocks ),Compressive Strength. (Set of 3 Blocks ),Water Absorption Test ( Set of 3 Blocks ) 14 STEEL BAR TESTING: Upto 16 mm (Set of 3 Bars) . Last date of submission for this tender is 2025-02-12. This is a Land Survey tender in ambad, Maharashtra