Directorate Of Purchase And Stores

Directorate Of Purchase And Stores has published Tender For Comet Assay System With Water Circulator Supply, Installation, Commissioning And Warranty Of Comet Assay System With Water Circulator , Supply, Installation, Commissioning & Warranty Of Comet Assay System With Water Circulator And Power Supply Unit: Specification: • The Instrument Should Be Suitable For Single Cell Gel Electrophoresis. • Should Have Robust Tank Construction, Made Up Of Ebony Acrylic Ensures That Cells Remain Free Of Exposure To Background Light And Dna Damage During Electrophoresis. • Having The Capacity Of 10 Slides With Cooled Central Platform To Provide A Convenient Surface For Slide Preparation And High Efficiency Cooling For Enhanced Resolution With External Cooling Source. • The System Buffer Volume Should Be ~550 Ml. • Dimensions Of The System Should Be 17X34x9 Cm ( Approx ) . • It Should Be Able To Run At 25V / 300Ma For 1 Hour. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use: Ce Certification As Will Be Used Inhospital Settings. • System Should Be Equipped With A Power Supply System From A Reputed Manufacturer. • It Must Have 2-300V, 1-700Ma And 150W With 1V / 1Ma Increment. • It Should Be Capable Of Running At Constant Current Constant Voltage. • Power Supply Should Have 5 Pair Of Output To Connect 5 Units All Together In The Same Unit. • It Should Be Programmable To Set Different Programs. • Display Should Be 2.4” Lcd Display. • It Must Include Preset Programs And Must Have 6 Steps With 30 Programmable Files. • It Should Have Timer To 999 Minutes And Timer Alarm Too After The End Of Run. • When Target Constant Mode Is Set, The Power Supply Automatically Adjusts The Two Other Parameters To Maximum To Allow For A Constant Run. • Safety Feature: No Load Detection, Leakage Detect, Over Load Detection, Over Temperature Protection, &Sudden Load Change Detection. ? Circulator: The Circulators Should Have Normal Heating & Cooling Applications. • It Should Use Microprocessor-Based Technology. • It Should Be Fitted With A Powerful Pump To Take Care Of Both Internal &External Circulation Applications. • It Should Incorporate A Heater To Care For Fast Heating Rates. • It Should Have A Bath Volume Of 5 Ltr; The Pump Flow Rate Should Be 12.5 Ltr / Min. • The Temperature Range Should Be Between -28 To 100°C. • The Temperature Control Should Be Pid+; The Temperature Stability Should Be ±0.03°C. • The Heater Capacity Should Be 2000 Watts. • It Should Have A Refrigerant Of R134 A. • It Should Have Special Safety Features For Low Liquid Level Over Temperature Protection. • Should Be Offered With A Standard Warranty Of 2 Years.. Last date of submission for this tender is 2023-03-02. This is a Power Supply Unit tender in Parel, Maharashtra