Department Of Electronics And Information Technology

Department Of Electronics And Information Technology has published Bids Are Invited For 1 Pentagonal Workstations - 1500 X 1500 X 600 - Providing And Placing Panel & Tile Based Modular Workstation, With Partition Of Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Fin: Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Worksurface - Outof 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D.Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine. Intermediate Blocks Are Given In Dl + Dl Finsh.Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh.Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Cpu Trolley - With Castors. Kbpt With Mousetray -Metal. Certificates - Green Pro Certified. India Design Mark Awarded In 2017. Bifma Level 3 Certified. Griha Certified. Indoor Air Quality Certified. Nos 4 2 Pentagonal Workstations - 1500 X 1500 X 600 - Providing And Placing Panel & Tile Based Modular Workstation, With Partition Of Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Fin: Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Worksurface - Outof 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D.Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine. Intermediate Blocks Are Given In Dl + Dl Finsh.Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh.Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Cpu Trolley - With Castors. Kbpt With Mousetray -Metal. Certificates - Green Pro Certified. India Design Mark Awarded In 2017. Bifma Level 3 Certified. Griha Certified. Indoor Air Quality Certified. Nos 3 3 Pedestals With Or Without Legs - All Metal Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Certificates - Greenguard Ul Certified Nos 7 4 High Back Chair With Adjustable Armrests - Seat / Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 45.5 Cm. ( / 1 / ) X 53.0 Cm. ( H ) Seat Size : 48.5 Cm. ( W ) X 47.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density Min 48 Kg / M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The S Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Amide Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Feature Which Should Be Inbuilt In Seat Base And The Tension ( Return Force ) Should Be User Weight Dependent. 4. Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Polyamide: The Height Adjustment Feature Should Be Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Should Be Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. 5, Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm 6. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Glass-Filled Polyamide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors 7. Twin Wheel Castors :5 Nos. Twin Wheel Castos Are Injection Moulded In Poly-Amide Having 5.0 ± 0.1 Cm Wheel Diamter Assembled To The Pedestal Certificates: Greenguard Ul Certified. Cii Green Products & Services Certified. Greenpro Certified. Indoor Air Quality Certified. Nos 5 5 High Back Chair With Adjustable Armrests - Seat / Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 45.5 Cm. ( / 1 / ) X 53.0 Cm. ( H ) Seat Size : 48.5 Cm. ( W ) X 47.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density Min 48 Kg / M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The S Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Amide Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Feature Which Should Be Inbuilt In Seat Base And The Tension ( Return Force ) Should Be User Weight Dependent. 4. Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Polyamide: The Height Adjustment Feature Should Be Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Should Be Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. 5, Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm 6. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Glass-Filled Polyamide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors 7. Twin Wheel Castors :5 Nos. Twin Wheel Castos Are Injection Moulded In Poly-Amide Having 5.0 ± 0.1 Cm Wheel Diamter Assembled To The Pedestal Certificates: Greenguard Ul Certified. Cii Green Products & Services Certified. Greenpro Certified. Indoor Air Quality Certified. Total Quantity : 23. Last date of submission for this tender is 2023-12-11. This is a Steel Furniture tender in Mumbai Suburban, Maharashtra