Coep Technological University

Coep Technological University has published Tender inviting for Elevators at Library and Computer IT Building, COEP Tech Pune.- 1 SITC of Passenger Lift at Library and Computer IT Building, COEP Tech Pune.. with Below Specifications 2 SITC of Electric Traction Passenger Lift at Library with • Rated capacity :- 15 Passenger/1020Kg• Floors :- B+G+2 floor (4 Stops/4 Landings)• Travel :- 12 to 15 mtrs.• Location of Lift Machine:- MRL• Rated speed:- 1.0mps VS• Car/Landing door clear opening of 1000 mm wide x 2000 mm high centre opening • Clear Car size of 1700 mm wide x 1250 mm deep x 2250mm high• Lift shaft available having clear size of 2145 mm wide x 1845mm deep, 1650mm Pit depth, 7050 mm Overhead.• Doors type :- COPO Doors with frame made from SS 304 brush finish grade solid(non- cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames. The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).• Lift car enclosure made from SS 304 brush finish grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & 18mm thick polished steel grey granite plate flooring, handrails, mirror, emergency light etc. • COP with SS brush finish face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi/Hindi/English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.• LOP with SS brush finish face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.• Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self-levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.• ARD complete with necessary SMF VRLA batteries.• Fireman controller having fireman switch at fire Landing.• CCTV surveillance system comprises of 2 nos. minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer in Charge.• Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.• Other mechanical parts such as T section adequate size guide rails forcar & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.• scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc.• General: - Job includes entire procedure of obtaining all necessaryErection permissions & License to Work the Lift from Electrical Inspector (Required All Documents will be provided by COEPTech)• The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.• Material Storage space with lock and key will be provided by COEPTech.• Three- and Single-phase supply with dedicated two Earthing’s up to themachine/Machin Room will be Provided by COEP Tech. (As per required by Lift Contractor)• With Access Control Facility. 3 Full Comprehensive AMC Charges for 15 Passenger/1020Kg at Library Lift for next 5 Years after Completion of One Year Warranty Period. 4 SITC of Electric Traction Passenger Lift at IT Computer Dept with • Rated capacity :- 15 Passenger/1020Kg• Floors :- G+7+T floor (9 Stops/ 9 Landings)• Travel :- 30 to 32 mtrs.• Location of Lift Machine:- MRL• Rated speed:- 1.0mps VS• Car/Landing door clear opening of 1000 mm wide x 2000 mm high centre opening• Clear Car size of 1700 mm wide x 1250 mm deep x 2250mm high• Lift shaft available having clear size of 2145 mm wide x 1775mm deep, 1650mm Pit depth, 4500 mm Overhead.• Doors type :- COPO Doors with frame made from SS 304 brush finishgrade solid(non- cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames. The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).• Lift car enclosure made from SS 304 brush finishgrade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & 18mm thick polished steel grey granite flooring, handrails, mirror, emergency light etc. • COP with SS brush finish face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi/Hindi/English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.• LOP with SS brush finish face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.• Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self-levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.• ARD complete with necessary SMF VRLA batteries.• Fireman controller having fireman switch at fire Landing.• CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.• Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.• Other mechanical parts such as T section adequate size guide rails forcar & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. (Ref. PWD CSR 2022-23)• scaffolding for erecting guide rails, providing and fixing steel girders/RCCwork having adequate strength for mounting and hoisting lift machine etc.• General: - Job includes entire procedure of obtaining all necessaryErection permissions & License to Work the Lift from Electrical Inspector (Required All Documents will be provided by COEPTech)• The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.• With Access Control Facility. 5 Full Comprehensive AMC Charges for 15 Passenger/1020Kg at IT Computer Dept Lift for next 5 Years after Completion of One Year Warranty Period. . Last date of submission for this tender is 2025-05-13. This is a Passenger Lift tender in Pune, Maharashtra