Coep Technological University

Coep Technological University has published Tender For Making Of Prototype For The Operational Turret Mechanism- 1 Manufacturing of the Turret Gun Mechanism (TMG) system 2 Traverse Mechanism with Base MountMotion Range = 0 degree To 360 degree.As per the specifications and CAD model provided in the tender document (refer to Pages 6,7 and 8, Annexure-I, Annexure-III, and the CAD model on Pages 9 to 15, and in accordance with the Scope of Work for the bidder detailed in the Table on Pages 16 and 17.) 3 Elevation mechanism.Motion Range = -20 degree To + 80 degree.Weapon Mounting cradle with a Solenoid for firing.As per the specifications and CAD model provided in the tender document (refer to Pages 6,7 and 8, Annexure-I, Annexure-III, and the CAD model on Pages 9 to 15, and in accordance with the Scope of Work for the bidder detailed in the Table on Pages 16 and 17.) 4 Tripod Table. As per the specifications and CAD model provided in the tender document (refer to Pages 6,7 and 8, Annexure-I, Annexure-III, and the CAD model on Pages 9 to 15, and in accordance with the Scope of Work for the bidder detailed in the Table on Pages 16 and 17.) 5 Worktable for the control & display unit. As per the specifications and CAD model provided in the tender document (refer to Pages 6,7 and 8, Annexure-I, Annexure-III, and the CAD model on Pages 9 to 15, and in accordance with the Scope of Work for the bidder detailed in the Table on Pages 16 and 17.). 6 Design, manufacturing, Assembly of Tracking system.(As per the specifications and CAD model provided in the tender document, pages 9 to 15. ) 7 bidder to demonstrate the actual working of Traverse & Elevation Axes, Mounting of weapon system, working of Trigger operating mechanism at bidder premises during the Pre Dispatch Inspection. (As per the specifications in Annexure IV, pages 16,17 and CAD model provided in the tender document, pages 9 to 15 ) 8 The bidder shall provide a control system for idle working demonstration. The system shall remain fully operational during testing with various control algorithms. 9 The bidder to provide mutually consented/ predefined number of days (minimum two numbers of one day training program) training for necessary training during commissioning trials(As per the specifications in Annexure IV, pages 16,17 and CAD model provided in the tender document, pages 9 to 15 ) 10 Installation support at COEP Tech Pune / ARDE Pashan for the necessary period. 11 Components of the TMG system 12 Gear Box. As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 13 Motor with Brake(Azimuth Motor). As per the specifications and CAD model provided in the tender document(refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 14 Motor with Brake(Elevation Motor) As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 15 Drive(Azimuth Motor Drive). As per the specifications and CAD model provided in the tender document(refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 16 Drive(Elevation Motor Drive). As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 17 Programmable Power Supply/Battery, 60 Volts/30 amps. As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 18 Microprocessor- Developer kit.As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 19 Limit Switch. As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 20 External Encoder for motor position. As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 21 Microcontroller. As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 22 Deep Groove Ball Bearing. As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 23 Slew Ring bearing. As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 24 Control Display Unit.As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 25 Drone.As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 26 Lidar. As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 27 Inclinometer.As per the specifications provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 28 Dummy guns. As per the specifications and CAD model provided in the tender document(refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 29 Linear Solenoid actuator. As per the specifications and CAD model provided in the tender document (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. 30 Electrical and Electronics Accessories (refer to Pages 7 and 8 Annexure-II, Annexure-III, and the CAD model on Pages 9 to 15), and in accordance with the Scope of Work for the bidder detailed in the Annexure-IV,on Pages 16 and 17. . Last date of submission for this tender is 2025-11-21. This is a Ammunition tender in Pune, Maharashtra