🎉 Your free trial plan has started. Plan will expire in 0 days

Ujjain Municipal Corporation

sagar, madhya pradesh

AOC value
₹11.28L
AOC date
28 Aug
Completion
Refer Docs
L1 bid
Refer Docs

Timeline

  1. -Published
  2. -Closes
  3. -Bid opens
  4. 28 Aug 24AOC date

Important info

Result ID
Refer Docs
Award of contract
28/08/2024
Published
Refer Docs
Tender closed
Refer Docs
Tender no
Bidding URL
Tender
Bidder details

AOC description

Ujjain Municipal Corporation has published Tender For Construction Of Teen Shed Work In Kshir Sagar Malkham Arina In W-24; 1 Exvation Work With 05Km Extra Lead 2 Cement Concrete Grade M-10 ( Nominal Mix ) With 20 Mm Maximum Size Of Stone Aggregate- Providing And Laying In Position Cement Concreteof Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up 3 Cement Concrete Grade M-20 ( Nominal Mix ) With 20 Mm Maximum Size Of Stone Aggregate- Providing And Laying In Position Cement Concreteof Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up 4 Cement Concrete Grade M-20 ( Nominal Mix ) With 20 Mm Maximum Size Of Stone Aggregate. 5 Thermo-Mechanically Treated Bars. ( Fe 500 D Or More ) - Reinforcement Forr.C.C. Work Including Straightening, Cutting, Bending, Placi Ng In Position And Binding Upto Floor Level Including Cost Of Binding Wire, Wastage And Over Laps Upto 12Mm Horizontal / Inclined Pos Ition Of Reinforcement Bars In Slab And Beams, Plinth, Chajjas, Lintels, Upto4.5M Vertical Length Of Reinforcement In Wall Columns ( Over Laps Shall Be Provided As Per Requirement Of Is : 13920; Is 456 & Sp :34 ) Etc. Complete. 6 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete.-Centering And Shuttering Including Strutting, Propping Stretchin G Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply 7 Brick Work Will Well Burnt Open Bhatta Bricks Crushing Strength Not Less Than 25Kg / Cm² And Water Absoption Not More Than 20% In Abov E Plinth Level Upto Floor Two Level In Cm 1:6 Including The Cost Of 8 Moorum / Hard Copra- Supplying And Filling In Plinth Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. 9 1:4 ( 1 Cement: 4 Sand ) -13 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 10 New Work ( Two Or More Coat Applied @1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Appl-Finishing Walls With Ac Rylic Smooth Exterior Paint Ofrequired Shade: 11 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @0.90 Ltr / -Finishing With Deluxemulti Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers 12 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gatesand Similar Works.- Providing And Fixingm.S. Tubular Frames Fordoors, Windows, Ventilators And Cupboard With Any Section Made Of 1.60Mm Or 1.25Mm Thick M.S. Sheet, Joints Mitred And Welded And G Rinded Finish With Profiles Required Size With 15X3mm Lugs 10Cm Long Embedded In Cement Concrete M-10 ( Nominal Mix With 20Mm Maximumsize Of Stone Aggregate ) Blocks 15X10x10cm Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bo Lts And Nuts As Required Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primers.1. Steel Work Welded In Built Up Sections / Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Ofapproved Steel Primer 13 Hot Finished Welded Type Tubes.-Steel Work In Built Up M.S. Tubular Section ( Round, Square Or Rectangular Hollow Tube Etc. ) Trusses / Frame Work Etc. / Railing Work Etc. Including Cutting, Hoisting Fixing In Position And Applying A Priming Coat Of Approved Steel Pri Mer, Welded And Bolted Including Special Shapedwashers Etc. 14 Supply & Installation Of Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ±5% Total Coated Thickness ( Tct ) Thick Zinc Coating 120Gsm As Per Is: 277 In240mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15- 18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimu M To Avoid Scratches While Transportation And Should Be Supplied In Single Length Upto 12 Meter Or As Desired By Engineer-In Charge.The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55Mm ) With Epdm Seal Or With Polymer Coated J Or L H Ooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead Complete U Pto Any Pitch In Horizontal / Vertical Or Curved Surfaces Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting 15 Kota Stone 25Mm Thick Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To M Atch The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of 1:4 Cement Mortar ( 1 Cement : 4 Course Sand ) ( Minim Um Size Of Kota Stone 2.0. Last date of submission for this tender is 2024-03-23. This is a Paint System tender in sagar, Madhya Pradesh

Free up your BG limit

Cover your EMD without touching your bank limit.

Get a quote
Tenderbook Surety

Documents

7 issued
  • Tender Document 1html
  • Tender Document 2pdf
  • Tender Document 3xlsx
  • Tender Document 4pdf
  • Tender Document 5pdf
  • Tender Document 6pdf
  • Tender Document 7pdf
lock-red

Unlock the Tender details for free

Bidder Details

  • Technical: clearedFinancial: clearedAOC: cleared
    Bid value
  • Technical: clearedFinancial: clearedAOC: not cleared
    Bid value
  • Technical: clearedFinancial: not clearedAOC: not cleared
    Bid value
  • Technical: not clearedFinancial: not clearedAOC: not cleared
    Bid value
lock-red

Unlock the Tender details for free

Disclaimer: Tenderbook takes every possible care to ensure the accuracy and authenticity of the tender information published on the platform. However, users are requested to verify the details from the original Tender Notice or Tender Document issued by the respective tendering authority before making any decisions or taking action related to a tender. We are not liable for any loss or damages arising from its use. For any corrections or feedback, connect with us at contact@tenderbook.in