Madhya Pradesh Madhya Kshetra Vidyut Vitaran Company Limited

Madhya Pradesh Madhya Kshetra Vidyut Vitaran Company Limited has published Estimate For Extension Work To Pm-Awas Pvtg 13 No. Benificiaries At Village Hamirpur-13 Nos. , Pm-Awas Pvtg 19 No. Benificiaries At Village Agora (02)-19 Nos. , Pm-Awas Pvtg 34 No. Benificiaries At Village Bidaniya - 34 Nos And Pm-Awas Pvtg 07 No. Benificiaries At Village Imaliya-07 Nos. Under Datia R_Dc ,O&M Division Datia- 1 Task 1 - Task Name:- : D-2.1 Material, Material Supplied by MPMKVVCL 2 140 Kg.,8.0 Mtrs. long PCC pole 3 LT Aerial bunched XLPE Cable 3 X 25+ 1 X 16+ 1 X 25 sqmm with aluminium alloy Bare messenger wire 4 Task 1 - Task Name:- : D-2.1 Material , Material Supplied by Contractor 5 LT A.B Cable tension clamps (Galvanized) 6 LT A B cable Suspension clamps (Galvanized) 7 Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) 8 Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) 9 M.S.Nuts with Bolts 10 Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 11 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 12 Task 2 - Task Name:- : E- 1.1 Material , Material Supplied by MPMKVVCL 13 140 Kg.,8.0 Mtrs. long PCC pole 14 11 KV(45KN) Composite Polymer Disc Insulators 15 11 KV Strain hardware (T&C type) fittings 16 11 KV D.O. Fuse Unit Polymer type 17 9 KV Gapless type ( 5KA) Polymer for DTR 18 Bi-metallic clamps Distribution Transformers Bushing 19 Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 20 XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 21 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 22 11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP) 23 XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 24 Task 2 - Task Name:- : E- 1.1 Material , Material Supplied by Contractor 25 Stay set complete without Stay wire 16 mm. (Painted) 26 STAY WIRE 7/3.15 MM.(7/10 SWG) 27 Stay Insulators 90X65mm 28 Stone Block/Pre cast block for base pedding(450X450X75MM) 29 Concreting of structures & foundation (1:3:6) 30 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 31 Complete jumpering of DTR 32 Danger Boards Enamelled 11 KV 33 Red oxide paint 34 Aluminium paint 35 M.S.Nuts with Bolts 36 Meter cum protection box for 25 KVA DTR 37 G.I. STRIP 25X3 MM1 38 G.I.Pipe 40 mm Dia C grade type 39 Bentonite compound powder 40 Galvanized nut & bolt with washer 41 Task 3 - Task Name:- : Service Connection Charge Material Supplied by MPMKVVCL 42 PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR 43 Single phase Electronic meter with data downloading facility & box 5-30 Amps. 44 Task 3 - Task Name:- : Service Connection Charge Material Supplied by Contractor 45 Rack Bolt/Screw 46 3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E 47 PVC Bush 48 LED Lamp with 9 Watt (Complete) 49 Switch Board 50 Wooden Board 10x8 51 Task 4 - Task Name:- : C- 1.4, Material Supplied by MPMKVVCL 52 140 Kg.,8.0 Mtrs. long PCC pole 53 11 KV Pin Insulator Polymer Composit (5 KN) 54 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 55 Task 4 - Task Name:- : C- 1.4 , Material Supplied by Contractor 56 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 57 Back filling of poles with boulders. 58 Red oxide paint 59 Danger Boards Enamelled 11 KV 60 Aluminium Binding wire and tape 61 M.S.Nuts with Bolts 62 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 63 Stone Block/Pre cast block for base pedding(450X450X75MM) 64 Aluminium paint 65 Fabricated Material , Material Supplied by MPMKVVCL 66 D.C. Cross arms 5 ft centre to center (100x50x6 mm) Channel 67 Transformer mountingChannel (100X50x6 mm.) 68 11 KV V cross arm 65X65X6 mm. angle type 69 11 KV Top clamp 65X65X6 mm. angle type 70 Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 71 Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 72 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 73 D.O.Mounting Channel 75x40x6mm 74 Labour & Transportation Charge 75 18 % GST on Total Cost . Last date of submission for this tender is 2025-12-29. This is a Electrification Work tender in Datia, Madhya Pradesh