Madhya Pradesh Forest Department

Madhya Pradesh Forest Department has published Tender For Materials Required For Building Your Shop And Warehouse And Repairing The Warehouse; 2 Profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep nbs will subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end nb shall be designed for anti-capillary action to avoid any seepage of water through the lateral overlap. The profile sheet of 0.5 mm thik. Hi strength steel with mn 550 MPa yield strength metallic hot dip coated with Aluminium Zinc alloy (55% Alluminium, 45% Zinc) as per AS 1397. Zincalume AZ150 (min 150 gms/sq.mt. total on both sides) with steel quality paint coat. The paint shall have a total coating thickness of nominal 35µm comprising of nominal 20 µm exterior cost on to surface and nominal 5 µm reverse coat on back surface over nominal 5 µm primer coat on both surface. The sheet shall have brand making of the manufacturer given product details on the back of the sheet at every 1 meter c/c for confirming genuinely of the material. Size - 22X4.25 & 12X4.25 & 10X4.25 Total - 7692 (Sq.Ft.) 3 G.S. Sheet roofing Providing and fixing pre coated gaivanised steel sheet roofing accessories 0.50 mm + 0.50% total coated thickness. Zinc coating 120 gsm as per IS 277 in 240 mpa steel grade 5.7 microns epoxy primer on both side of the steel and polyester top coat 15:18 microns using self dolling/ self tapping screws complete 12:126:1 Ridge Ridges plain (500-600mm) 4 Steel works in built up tubular (round square or rectangular hollow tubes etc) trusses/frame work etc. including cutting hosting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete (10K15:1 Hot finished welded type tubes) 5 M.S. Rolling shutters with installation.I.S.-4454-part 1 and M.S. top cover of required thickness for rolling shutters10.6.1.125 mm thick top 80X1.25 mm M.S. Laths with 1.25mm thick top cover. 6 ISI Rectangle Pipe for Shed stand Size - 4X4 (Inch)Approx 400 Kg 7 ISI Pipe for Chord/rafter/webs Size - 3X2 (Inch) Approx 1300 Kg 8 ISI Pipe for Batten.Size - 2X2 (Inch) Approx 700 Kg. 9 ISI Pipe for shad side support. Size 2X2 (Inch) Approx 400 Kg. . Last date of submission for this tender is 2025-02-27. This is a Construction Material tender in ashoknagar, Madhya Pradesh