Directorate Of Technical Education

Directorate Of Technical Education has published Supply Of Hostel Furniture , Visitor Chair: Is Over All Dimensions: W 535 X D 595 X H 820 Mm Seat Height 460Mm. Seat Size: 420 X 420 Mm Approx. Back Size: 420 (W) X 270 Mm (H) Approx. Material: The Seat And Back Shall Be Made Up Of L0 Mm Thick Hot Pressed Water Commercial Plywood, Upholstered With Fabric And Moulded Polyurethane Foam (40 Mm Thick With Density 40-50). Tubular Frame: The Main Frame Shall Be Cantilever Type Reinforced At The Bends To Give Cushioning Effect And Added Strength And Made Of Dia 25Mm X 14 Gauge Ms Tube. Tubular Armrest Shall Be Made Single Piece Pu Foam Reinforced With Ms Plate.Finish: All Steel Components Shall Be Epoxy Powder Coated; Pre-Treatment Of Surface. (Overall Appearance Of The Product Shall Be As Per Photograph No.1). , M.S. Pipe Cots: Supply Of Powder Coated Cots Of Size-6’X3’ H-16” Frame In 1.5”X 1” Pipe Of 18 Gauge , Legs And Head & Leg Foot Rest 1.5” Dia Pipe Of 18 Gauge, Vertical Head & Leg Support Pipe 6 Nos Of 0.75” Dia Of 20 Gauge, Frame Support Pipe 4 Nos. Of 1”X1” Of 20 Gauge, Leg Support Pipe 2 Nos Of 1”X 1” Of 20 Gauge, Ply 12 Mm Thick Isi Mark Water Proofing And Ht Of Head & Foot 16” & 10” Respectively Above Ply. All Steel Components Shall Be Epoxy Powder Coated; Pre-Treatment Of Surface. Overall Appearance Of The Product Shall Be As Per Photograph No.2). , Chair For Students : Frame Made From 20Mm 16 Gauge Round Ms Pipe Welded With 18 Gauge Perforated Sheet For Seat & Back. Without Handle. All Steel Components Shall Be Epoxy Powder Coated; Pre-Treatment Of Surface. Seat Ht: 18”, Back Ht: 30”, Seat Size: 16” X 17” (Front Side Half Round), Back Size: Half Round 16” X 8” (Overall Appearance Of The Product Shall Be As Per Photograph No.3). , Wooden Conference Table :Size : 3000 W X 1200 D X 750 H (Mm) Work Topis Made Up Of 36 Mm Thick Ply With 1 Mm Thick Laminated Table Top Finished With 2 Mm Thick Pvc Edge Bending With 02 Nons. Access Flap Up Box Of 300 X 120 Mm Is Fitted On Work Top. Hollow Legs 150 Mm Wide Made Of 18 Mm Thick Ply With 1 Mm Thick Laminated Finished With 2 Mm Thick Pvc Edge Bending. Modestry Is Made 18 Mm Ply With 1 Mm Thick Finished With 2 Mm Thick Edge Bending.(Overall Appearance Of The Product Shall Be As Per Photograph No.4). , Chairs Of Conference Table: Chair Type – Non Revolving And Non Tilting Chair With Armrest. Chair Frame Type: Cantilever, Elliptical Pipe 15 X 33 Mm Of 16 Gauge. Chrome Platted.Seat & Back Rest Type – Padded Seat & Back – Upholestery –Latheritte I.E. 0.7 To 1.5 Mm Thick Polyurethane Foam Thickness Used In Seat.Minimum Seat Height From Floor – 495 Mm +/- 5 Mm.Minimum Depth Of Seat - 500 Mm +/- 5 Mm. Minimum Width Of Seat - 500 Mm +/- 5 Mm.Minimum Width Of Backrest From Seat - 560 Mm +/- 5 Mm. (Overall Appearance Of The Product Shall Be As Per Photograph No.4).. Last date of submission for this tender is 2024-08-28. This is a Office Furniture tender in indore, Madhya Pradesh