Central Public Works Department

Central Public Works Department has published Bids Are Invited For Providing & Placing Of Sofa Three Seat Executive Sofa : Understructure: Understructure Is Made Up Of Pinewood Members. Pinewood Are Of Cross Sections 22X64mm, 34X64mm & 16X35mm Without Having Major Knots & Defects On The Surface. 3Mm Mdf Is Stapled On The Seat Front Baton. Zigzag Spring Of Dia. 3.8Mm Is Mounted On The Seat Structure Using Plastic Spring Mounting Clip For Support & Additional Cushioning Purpose. Non Woven Fabric Is Stapled On The Seat Structure Frame Above The Spring Assembly To Avoid Direct Contact Between The Metal Springs And The Seat Foam. This Prevents Seat Foam From Tearing. Powder Coated Ms Support Pipe Is Fitted With The Wooden Seat Frame To Give Additional Strength To The Structure. Complete Understructure Is Made By Gluing, Nailing & Stapling. • Foam : Seat Is Made Of Pu Foam With Density 28 Kg / M3 With A Top Layer Of Supersoft Pu Foam With Density 32 Kg / M3. Seat Front Bottom Is Stapled With The Pu Foam With Density 28 Kg / M3. • Upholstery : Seat Upholstery Is Made In Polyester Fabric With Partitions.Backrest :Understructure: Understructure ‹S Made Up Of Combination Of Plywood & Pinewood Members. Plywood Is 12+1Mm Thk. [ Moisture Resistance & Termite Proof As Per Is:303 ] & Pinewood Are Of Cross Sections 16X35mm, 12X22mm & 16X74mm And Triangular Batons Of 22X75 Without Having Major Knots & Defects On The Surface. Hdpe Sheet Is Stapled On The Back And Front Of The Structure And On The Ear Ply. • Foam : Backrest Is Made Up Of Combination Of Pu Foam With Density 28 Kg / M3 And 32 Kg / M3 Super-Soft On The Front Lumber Portion And The Shoulder Area Has Supersoft Pu Foam With Density 32 Kg / M3. This Is Covefed With A Top Layer Of 200 Gsm Recron Sheet. The Top Surface Has Foam With Density 32 Kg / M3 And A Layer Of 200 Gsm Recron Sheet. Complete Back Surface & Underarm Of Backrest Is Glued With The Pu Foam With Density 28 Kg / M3. • Upholstery: Backrest Upholstery Is Made In Polyester Fabric Jacket With Recron Sheet Cushions Of 200 Gsm Sandwitched Between A Layer Of White Non-Woven Cloth Of 30 Gsm. The Upholstered Jacket Has A Button At The Front. Armrest:• Understructure: Understructure Is Made Of Combination Of Plywood & Pinewood Members. Plywood Is 12+1Mm Thk. [ Moisture Resistance & Termite Proof As Per Is:303J & Pinewood Are Of Cross Section 16X35mm Without Having Major Knots & Defects On The Surface. 2Mm Cardboard And Hdpe Sheet Is Stapled On The Structure To Provide A Surface For Sticking Foam. • Foam : Armrest Is Made Of Pu Foam With Density 28 Kg / M3. • Upholstery : Armrest Upholstery Is Made In Polyester Fabric.Legs: Option A: Rubberwood [ Grade-Aj Legs With The M8 Stud For Fitting At The Bottom Surface Of The Armrest Lh & Rh. Legs Are Coated With Pu Clear Lacquer Coat [ Black Matt Finish ] . [ Min. Hardness - 1H ] Option B: Plastic Injection Moulded Tegs Made Of Material Pa-6 With Insert Of M8 Stud For Fitting At The Bottom Surface Of The Armrest Lh & Rh. Plastic Legs Are Black [ Matte Finish ] . Assembly : Upholstered Seat, Backrest, Armrest-Lh & Armrest-Rh Are Assembled Together With The M8 Bolts, Nuts & Washer. Then A Non-Woven Is Stapled On The Bottom Surface To Cover The Structure. Packet Each Packet Contains One Assembled Sofa Without Legs And A Separate Hardware Packet Containing 4 Nos. Of Rubberwood Legs / Plastic Injection Moulded Legs. Size - 3 Seater ( W ) 1900* ( D ) 825* ( H ) 895Mm - / + 20 Mm. Approved Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) Design As Approved By Engineer-In-Charge. Providing And Placing Computer Table Of Size-1995Mm ( W ) X 600Mm ( D ) X 750Mm ( H ) - / + 0.10 Mm. Providing And Placing 18 Mm Thk. Pre Laminated Particle Board Rectangular Work Surface With 2 Mm Pvc Edging, At Work Top Height 750Mm, Having Slide Mounting Lockable Drawer Slide With Black Powder Coating With Sliding Kbpt & Mouse Tray & 4 Lockable Castors, Should Have One Book Shelf And Should Have Wire Manager Prelaminate Board Shoulde Be Of Density: 640 To 800 Kg / M3, Moisture Content: 10%, Modulus Of Rupture: 13.0 N / Mm2, Tensile Strength : 0.40 N / Mm2 Approved Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) Design As Approved By Engineer-In-Charge. Providing And Placing Of Back Unit ;, Back Unit Shall Be Size- 128.0 Cm ( W ) X 42.5 Cm ( D ) X 70.5 Cm ( H ) Top And Side Unit Should Be Made Of 25Mm Thick Plain Particle Board ( Ppb ) Clad With 0.6Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate ( Bdl ) . Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading. Doors, Partitions And Shelves Should Be 18 Mm Thick Plain Particle Board ( Ppb ) Clad With 1.0 Mm Thick Decorative Laminate ( Dl ) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) Total Quantity : 3. Last date of submission for this tender is 2022-09-30. This is a Sofa Set tender in Bhopal, Madhya Pradesh