Archaeological Survey Of India

Archaeological Survey Of India has published Tender For Execution Of Work With Materials Under Mc Ew Sr To Boundary Wall Around Shiv Sagar Lake, Wgt, Khajuraho--- 1 Provision of Earth work in excavation for preparing base for cement concreting for road by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil [M3] 2 Providing and laying insuit cement concreting 1:3:6 (i.e 1 Cement : 3 Sand: 6 Stone aggregate of size 20 mm) of trap/granite/quartzite/geniss metal for foundation and bedding bailing out water, compacting finishing uneven & honey combed surface including curing etc. complete [M3] 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 4 40 mm thick Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade White sand stone - exposed face fine dressed with rough backing 5 Grills-Steel work in built up tubular (round, square or rectangular hollow tubes etc.) sections etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete for grills.[ Specification : Horizontal support of 100x 50 x 5 MM Hollow rectangular MS bar of length 9.15 meter at top with10.50 kg/RMW, 6 No.Vertical support of 50X50X5 MM Hollow square MS bar of length 1.0 M with 6.00 Kg/RMW, 80 No. Vertical support of 20x 20x 2 MM dia. square MS bar of length 0.75 m with 1.12 Kg/RMW at 8 cm apart, 2 No.Horizontal support of 50X5 MM rectangular MS Plate of length 8.1 meter at top and bottom with 2KG/RMW, Thus Weight of One grill Section is 279.09 KG ] 6 Sliding Gate -Steel work in built up tubular (round, square or rectangular hollow tubes etc.) sections etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete for gate.[ specification : 2 No.Vertical support of 50X50X4.5 MM Hollow square MS bar of length 1.5 M at both, 2 No. Horixontal support of 50X50X4.5 MM Hollow square MS bar of length 3 M at both ends with 6.02/RMW, 20 No. Vertical support of 25X25X4.5 MM Hollow square MS bar of length 1.5 M with 3.7 Kg/RMW, 4 No.Outer Support Pillars of 96X48X4 MM Hollow rectangular MS bar with 8.22 Kg/RMW with V or plane roller track, Extra for L bracket Guide Bracket,roller and wastage ] 7 Painting Grill and Gate Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture 8 Provision for 12 mm cement plaster on brick work before stone cladding work with 1:4 (1 cement : 4 fine sand) .for strength 9 Purchase of T&P and other miscellaneous items necessary during work . Last date of submission for this tender is 2025-09-08. This is a Construction Material tender in Khajuraho, Madhya Pradesh