🎉 Your free trial plan has started. Plan will expire in 0 days

Department Of Electricity

kavaratti, lakshadweep

AOC value
Refer Docs
AOC date
Refer Docs
Completion
Refer Docs
L1 bid
Refer Docs

Timeline

  1. -Published
  2. -Closes
  3. -Bid opens
  4. -AOC date

Important info

Result ID
Refer Docs
Award of contract
Refer Docs
Published
Refer Docs
Tender closed
Refer Docs
Tender no
Bidding URL
Tender
Bidder details

AOC description

Department Of Electricity has published Design, Manufacture And Supply Of L.T Out Door Frp Pole Mounted Box To Lakshadweep Electricity Department (Led) , 1. Pole Mounted Molded Type Service Connection Street Box Made Out Of 4 Mm Thick Frp Material Of Size 900 Mm (H) X 450 Mm (W) X 300 Mm (T) With Roof Type Top Cover And Fixing Clamp. The Box Shall Be Single Door At Front Side With Perfect Looking Arrangement. Back Side With Two Numbers Double Lovers For Proper Air Ventilation. Both Sides Be Provided With Operable Hinged Type Doors With Lovers For Easy Entering Of Hand To Work Inside The Box. The Box Shall Have Provision For 6/7 Numbers Cable Glands Suitable For Lt Ug Cable Of Size 4 X 25, 4 X 16, 2X 16, 2X10 Etc With Suitable Bus Bar And Fuse Arrangements As Detailed Below. An Insulated Bar Made Of Frp/Hylum Is Also To Be Provided Tohold The Fuse Units And Shall Be Operable From Front. The Box Should Be Painted With Two Coats Of Best Quality Enamel Paint Of Colour Light Green And Properly Pasted With Danger Signs And ‘Electricity Department, Lakshadweep’ At Front Having The Following Arrangement Inside. A) Properly Sleeved (Ryb And Bl) Bus Bars Made Out Of Aluminum Strip Of Size 25 X 10 Mm With Necessary Supports And A Neutral Link Of 25 X 6Mm Size. B) Re-Wirable Type 32 Amps Hrc Fuse Units 2 Nos Each In Each Phase, 63 Amps Hrc Fuse 2 Nos.Each Bus Barin Each Phase And One In The Incoming Point For Connecting Street Light And 125 Amps Open Type Hrc Fuse Units With Siemens Type Hrc Fuse To Connect Incoming Cable (The Fuses Must Be Siemens/ Abb/Ge/L&T Make Only C) Necessary Supports For Holding Incoming /Out Going Cables At Two Points Minimum At Rear Side. D) Fixing Clamp (2 Nos) Made Out Of 50 X 6 Mm Ms Flat Along With Suitable For 110 Mm Gi Pipes Along With Suitable Ss/ G.I Bolt And Nut E) Two Numbers Aluminum Stiffeners Of Size 40 X 6 Mm Should Be Provide To Support The Clamp. 2).Spare Hrc Fuse Unit Bus Bar Type Of Make Specified Above 63 Amps 3 Nos. Each Box. 3).Spare Hrc Fuse Unit Bus Bar Type Of Make Specified Above 32 Amps 3 Nos. Each Box.. Last date of submission for this tender is 2024-07-30. This is a Fuses tender in Kavaratti, Lakshadweep

Free up your BG limit

Cover your EMD without touching your bank limit.

Get a quote
Tenderbook Surety

Documents

2 issued
  • Tender Document 1pdf
  • Tender Document 2html
lock-red

Unlock the Tender details for free

Bidder Details

  • Technical: clearedFinancial: clearedAOC: cleared
    Bid value
  • Technical: clearedFinancial: clearedAOC: not cleared
    Bid value
  • Technical: clearedFinancial: not clearedAOC: not cleared
    Bid value
  • Technical: not clearedFinancial: not clearedAOC: not cleared
    Bid value
lock-red

Unlock the Tender details for free

Disclaimer: Tenderbook takes every possible care to ensure the accuracy and authenticity of the tender information published on the platform. However, users are requested to verify the details from the original Tender Notice or Tender Document issued by the respective tendering authority before making any decisions or taking action related to a tender. We are not liable for any loss or damages arising from its use. For any corrections or feedback, connect with us at contact@tenderbook.in