Department Of Horticulture

Department Of Horticulture has published Green House Project 2022-23 ( Changthang ) 60 Feet X 24 Feet -Ladakh Green House Project Supply And Installation Of Green House , Work To Be Carried Out By The Contractor / Supplier / Vendor / Firm. A ) Size Of Green House:- 60 Ft X 24 Ft X 9 Ft 6 Inches Approx ( Lxwxh ) ( External Dimension ) . B ) Door:- Rectangular Iron Door Frame; Dimension 6’X2.8 Approx; Uv Stabilized Triple Layer 16 Mm Polycarbonate Sheet Panel With Hook For Supporting Extra Protective Covering For Winter. C ) Window: 4 Nos ( One No 2’X2’ Approx On Side Wall ( There Nos 2’X2’ On Metal Frame ) With Provision For Opening. D ) Above Ground Metallic Frames: Ms Rectangular Hollow Pipe ( 50-55X25-27X3.0-3.2Mm ) Duly Bended In Required Shape At Approx 4.5-5.00’ Distance Horizontally And 3.2’-3.6’ Vertically As Per Width Of Polycarbonate Sheet, Joints Welded / Nuts Bolts: Pipes Paints With Red Oxide And Enameled Coated. E ) Vertical Poles:- Two Nos Of 50 Mm Ms Supporting Poles Of Approx Size 63’ Each To Support The Roof. F ) Supporting Poles:- Four Nos Of Metallic Supporting Poles Of Appox ( 50 Mm Ms Pipe ) To Support The Roof ( Approx 9-10’ Height Above Ground And 1’ Underground ) And Four Nos Of Support Pole In Middleof The Green House Structure ( Approx 6-7.5’ Height Above Ground And 1’ Underground. Welding / Nut Bolts Of Joints Base Supporting Angles Properly Bolt With Anchor Bolt. G ) Foundation Of Supporting Should Be Cement Concrete, Poles To Be Fixed On Foundation Plate With Nuts Bolts. H ) Metallic Pipes Paint With Red Oxide And Enameled Coated. I ) A Metallic Pipe ( 50Mm Approx 3 Ft Bend At One Side ) On One Side Of The Wall At Ground Level For Irrigation Purpose. J ) Roofing:- Roof Made Of Colored Pre Painted Gi Sheet Of Size 10X4’X0.6-0.7’Mm Properly Anchored And Covered With Mud Or Soil Of 5 Inches Thick Roof To Be Given Support With Truss Of Ms Pipe ( 50Mm ) . K ) Cladding Material:- Triple Layer Polycarbonate Sheet 16Mm Thick Anti Uv Protected On Both Sides Clear White ( Approx 110 Sq Mtr Area ) On Above Ground Metallic Frame With Extra Support Of Aluminum T Bits ( 20X3mm Width ) , Fixed Nuts And Bolts And Silicon Sealing Of Gaps ( If Any ) : Poly Carbonate Joints Should Be On The Metallic Frame.Dimension Of The Design As Per Figure Shown In E- Nit. Last date of submission for this tender is 2022-08-26. This is a Coats And Jackets tender in Leh, Ladakh