Department Of Agriculture

Department Of Agriculture has published Ladakh Green House Project Supply And Installation Of Green House , Work To Be Carried Out By The Contractor/Supplier/Vendor/Firm. A) Size Of Green House:- 60 Ft X 24 Ft X 9 Ft 6 Inches Approx (Lxwxh) (External Dimension). B) Door:- Rectangular Iron Door Frame; Dimension 6’X2.8 Approx; Uv Stabilized Triple Layer 16 Mm Polycarbonate Sheet Panel With Hook For Supporting Extra Protective Covering For Winter. C) Window: 4 Nos ( One No 2’X2’ Approx On Side Wall ( There Nos 2’X2’ On Metal Frame) With Provision For Opening. D) Above Ground Metallic Frames: Ms Rectangular Hollow Pipe (50-55X25-27X3.0-3.2Mm) Duly Bended In Required Shape At Approx 4.5-5.00’ Distance Horizontally And 3.2’-3.6’ Vertically As Per Width Of Polycarbonate Sheet, Joints Welded/Nuts Bolts: Pipes Paints With Red Oxide And Enameled Coated. E) Vertical Poles:- Two Nos Of 50 Mm Ms Supporting Poles Of Approx Size 63’ Each To Support The Roof. F) Supporting Poles:- Four Nos Of Metallic Supporting Poles Of Appox (50 Mm Ms Pipe) To Support The Roof ( Approx 9-10’ Height Above Ground And 1’ Underground) And Four Nos Of Support Pole In Middleof The Green House Structure (Approx 6-7.5’ Height Above Ground And 1’ Underground. Welding/Nut Bolts Of Joints Base Supporting Angles Properly Bolt With Anchor Bolt. G) Foundation Of Supporting Should Be Cement Concrete, Poles To Be Fixed On Foundation Plate With Nuts Bolts. H) Metallic Pipes Paint With Red Oxide And Enameled Coated. I) A Metallic Pipe (50Mm Approx 3 Ft Bend At One Side) On One Side Of The Wall At Ground Level For Irrigation Purpose. J) Roofing:- Roof Made Of Colored Pre Painted Gi Sheet Of Size 10X4’X0.6-0.7’Mm Properly Anchored And Covered With Mud Or Soil Of 5 Inches Thick Roof To Be Given Support With Truss Of Ms Pipe (50Mm). K) Cladding Material:- Triple Layer Polycarbonate Sheet 16Mm Thick Anti Uv Protected On Both Sides Clear White (Approx 110 Sq Mtr Area) On Above Ground Metallic Frame With Extra Support Of Aluminum T Bits (20X3mm Width), Fixed Nuts And Bolts And Silicon Sealing Of Gaps (If Any): Poly Carbonate Joints Should Be On The Metallic Frame.Dimension Of The Design As Per Figure Shown In E- Nit. Last date of submission for this tender is 2022-08-09. This is a Peb tender in Leh, Ladakh