Municipality

Municipality has published Construction Of Mcf ( Material Collection Facility Center ) . -2 2.28.1 : Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M.All Kinds Of Soil 3 2.8.1 : Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil 4 4.1.8 : Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Nominal Size ) 5 5.22.6 : Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 6 5.1.3 : Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 7 5.9.1 : Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns, Etc For Mass Concrete 8 Od351324 / 2018_2019 : Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 30X20x15cm Or Nearest Available≪Br≫Size Confirming To Is 2185 Part 1 Of 1979 For Foundation And Plinth With Thickness 20 Cm And Above In: Cm≪Br≫1:6 ( 1 Cement : 6 Coarse Sand ) Etc Complete 9 Od351325 / 2018_2019 : Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 30X20x20cm Or Nearest Available Size Confirming To Is 2185 Part 1 Of 1979 For Foundation And Plinth With Thickness 20 Cm And Above In: Cm1:6 ( 1 Cement : 6 Coarse Sand ) Etc Complete 10 5.9.5 : Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 11 5.9.16.1 : Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Edges Of Slabs And Breaks In Floors And Wallsunder 20 Cm Wide 12 13.4.1 : 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Coarse Sand ) 13 13.9.1 : Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) Finished With A Floating Coat Of Neat Cement.12 Mm Cement Plaster 14 10.16.1 : Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes 15 12.1.3 : Providing Corrugate G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) , Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2 16 12.4.2 : Providing Ridges Or Hips Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2 17 10.5.1 : Providing And Fixing 1 Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer.Using M.S. Angels 40X40x6 Mm For Diagonal Braces 18 9.48.2 : Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete.Fixed To Openings / Wooden Frames With Rawl Plugs Screws Etc 19 5.47.2 : Providing And Fixing In Position Factory Made Precast Rcc M-40 Doors And Win Frames Having Excellent Smooth Finish As Per Is:6523 With Reinforcement Of 3 Nos, 6 Mm Dia Main Bars Tied With 3 Mm M.S Stirrups Placed @ 200 Mm Cc Nad 6 Numbers High Strength Polymer Blocks Of Required Size For Fixing Hinges Including Providing 6 No Specially Designed M.S Galvanised Sleeves For Accomodating 6 Mm Dia Fully Threaded Bolts For Fixing Hold Fast On Vertical Members, Providing Suitable Arrangement For Receiving Sliding Door Bolts And Tower Bolt Etc All Complete, As Per The Direction Of Engineer In Charge. ( The Cost Of Hold Fast And Cc Block Of 1:3:6 Mix Is Also Included In The Item. ) The Frame Shall Be Measured In Running Meter Correct To Two Places Of Decimal.Door Frame 100 Mm X 60 Mm. 20 5.47.3 : Providing And Fixing In Position Factory Made Precast Rcc M-40 Doors And Win Frames Having Excellent Smooth Finish As Per Is:6523 With Reinforcement Of 3 Nos, 6 Mm Dia Main Bars Tied With 3 Mm M.S Stirrups Placed @ 200 Mm Cc Nad 6 Numbers High Strength Polymer Blocks Of Required Size For Fixing Hinges Including Providing 6 No Specially Designed M.S Galvanised Sleeves For Accomodating 6 Mm Dia Fully Threaded Bolts For Fixing Hold Fast On Vertical Members, Providing Suitable Arrangement For Receiving Sliding Door Bolts And Tower Bolt Etc All Complete, As Per The Direction Of Engineer In Charge. ( The Cost Of Hold Fast And Cc Block Of 1:3:6 Mix Is Also Included In The Item. ) The Frame Shall Be Measured In Running Meter Correct To Two Places Of Decimal.Door Frame 85 Mm X 60Mm 21 9.5.2.2 : Providing And Fixing Panelled Or Panelled And Glazed Shutters For Shutters For Doors, Windows And Clerestory Windows, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessery Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer - In-Charge.30 Mm Thick Shutters 22 11.38 : Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) , Of Ist Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. 23 13.37.1 : White Washing With Lime To Give An Even Shade:New Work ( Three Or More Coats ) . Last date of submission for this tender is 2020-01-08. This is a Earth Moving Machinery tender in Manjeri, Kerala