Local Self Government Department

Local Self Government Department has published Tender For AMRUT-Rejuvenation of A A Kochunni Master Park Purchase of Gym Equipments in Div 8--- 1 Air walker -Supply, Delivery, Installation and Commissioning of Royal Air Walker with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.charges etc complete 2 Commissioning of Royal Elliptical with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO 3 Chest press - Supply, Delivery, Installation and Commissioning of Royal Chest Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO. 4 Shoulder press -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO. 5 )Legpress cum seating twister -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO. 6 Leg lift post --Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO 7 Tai chai spinner Double -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & IS 8 Leg press extension -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of B class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO. . Last date of submission for this tender is 2025-09-17. This is a Gym Equipment tender in Ernakulam, Kerala